RFC 5758 Internet X.509 Public Key Infrastructure: Additional Algorithms and Identifiers for DSA and ECDSA

[Docs] [txt|pdf] [draft-ietf-pkix...] [Tracker] [Diff1] [Diff2] [Errata]

PROPOSED STANDARD
Errata Exist
Internet Engineering Task Force (IETF)                           Q. Dang
Request for Comments: 5758                                          NIST
Updates: 3279                                               S. Santesson
Category: Standards Track                                   3xA Security
ISSN: 2070-1721                                              K. Moriarty
                                                                     EMC
                                                                D. Brown
                                                          Certicom Corp.
                                                                 T. Polk
                                                                    NIST
                                                            January 2010


               Internet X.509 Public Key Infrastructure:
        Additional Algorithms and Identifiers for DSA and ECDSA

Abstract

   This document updates RFC 3279 to specify algorithm identifiers and
   ASN.1 encoding rules for the Digital Signature Algorithm (DSA) and
   Elliptic Curve Digital Signature Algorithm (ECDSA) digital signatures
   when using SHA-224, SHA-256, SHA-384, or SHA-512 as the hashing
   algorithm.  This specification applies to the Internet X.509 Public
   Key infrastructure (PKI) when digital signatures are used to sign
   certificates and certificate revocation lists (CRLs).  This document
   also identifies all four SHA2 hash algorithms for use in the Internet
   X.509 PKI.

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 5741.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   http://www.rfc-editor.org/info/rfc5758.










Dang, et al.                 Standards Track                    [Page 1]


RFC 5758                        DSA/ECDSA                   January 2010


Copyright Notice

   Copyright (c) 2010 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1. Introduction ....................................................2
   2. Hash Functions ..................................................3
   3. Signature Algorithms ............................................3
      3.1. DSA Signature Algorithm ....................................4
      3.2. ECDSA Signature Algorithm ..................................4
   4. ASN.1 Module ....................................................5
   5. Security Considerations .........................................6
   6. References ......................................................6
      6.1. Normative References .......................................6
      6.2. Informative References .....................................7
   7. Acknowledgements ................................................7

1.  Introduction

   This specification defines the contents of the signatureAlgorithm,
   signatureValue, and signature fields within Internet X.509
   certificates and CRLs when these objects are signed using DSA or
   ECDSA with a SHA2 hash algorithm.  These fields are more fully
   described in RFC 5280 [RFC5280].  This document also identifies all
   four SHA2 hash algorithms for use in the Internet X.509 PKI.

   This document profiles material presented in the "Secure Hash
   Standard" [FIPS180-3], "Public Key Cryptography for the Financial
   Services Industry: The Elliptic Curve Digital Signature Standard
   (ECDSA)" [X9.62], and the "Digital Signature Standard" [FIPS186-3].

   This document updates RFC 3279 [RFC3279] Sections 2.1, 2.2.2, and
   2.2.3.  Note that RFC 5480 [RFC5480] updates Sections 2.3.5, 3 (ASN.1
   Module), and 5 (Security Considerations) of RFC 3279.





Dang, et al.                 Standards Track                    [Page 2]


RFC 5758                        DSA/ECDSA                   January 2010


   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

2.  Hash Functions

   This section identifies four additional hash algorithms for use with
   DSA and ECDSA in the Internet X.509 certificate and CRL profile
   [RFC5280].  SHA-224, SHA-256, SHA-384, and SHA-512 produce a 224-bit,
   256-bit, 384-bit, and 512-bit "hash" of the input, respectively, and
   are fully described in the "Secure Hash Standard" [FIPS180-3].

   The listed one-way hash functions are identified by the following
   object identifiers (OIDs):

   id-sha224  OBJECT IDENTIFIER  ::=  { joint-iso-itu-t(2)
        country(16) us(840) organization(1) gov(101) csor(3)
        nistalgorithm(4) hashalgs(2) 4 }

   id-sha256  OBJECT IDENTIFIER  ::=  { joint-iso-itu-t(2)
        country(16) us(840) organization(1) gov(101) csor(3)
        nistalgorithm(4) hashalgs(2) 1 }

   id-sha384  OBJECT IDENTIFIER  ::=  { joint-iso-itu-t(2)
        country(16) us(840) organization(1) gov(101) csor(3)
        nistalgorithm(4) hashalgs(2) 2 }

   id-sha512  OBJECT IDENTIFIER  ::=  { joint-iso-itu-t(2)
        country(16) us(840) organization(1) gov(101) csor(3)
        nistalgorithm(4) hashalgs(2) 3 }

   When one of these OIDs appears in an AlgorithmIdentifier, all
   implementations MUST accept both NULL and absent parameters as legal
   and equivalent encodings.

   Conforming certification authority (CA) implementations SHOULD use
   SHA-224, SHA-256, SHA-384, or SHA-512 when generating certificates or
   CRLs, but MAY use SHA-1 if they have a stated policy that requires
   the use of this weaker algorithm.

3.  Signature Algorithms

   This section identifies OIDs for DSA with SHA-224 and SHA-256 as well
   as ECDSA with SHA-224, SHA-256, SHA-384, and SHA-512.  The contents
   of the parameters component for each signature algorithm vary;
   details are provided for each algorithm.





Dang, et al.                 Standards Track                    [Page 3]


RFC 5758                        DSA/ECDSA                   January 2010


3.1.  DSA Signature Algorithm

   The DSA is defined in the Digital Signature Standard (DSS)
   [FIPS186-3].  DSA was developed by the U.S. Government, and can be
   used in conjunction with a SHA2 hash function such as SHA-224 or
   SHA-256.  DSA is fully described in [FIPS186-3].

   When SHA-224 is used, the OID is:

   id-dsa-with-sha224 OBJECT IDENTIFIER  ::=  { joint-iso-ccitt(2)
       country(16) us(840) organization(1) gov(101) csor(3)
       algorithms(4) id-dsa-with-sha2(3) 1 }.

   When SHA-256 is used, the OID is:

   id-dsa-with-sha256 OBJECT IDENTIFIER  ::=  { joint-iso-ccitt(2)
       country(16) us(840) organization(1) gov(101) csor(3)
       algorithms(4) id-dsa-with-sha2(3) 2 }.

   When the id-dsa-with-sha224 or id-dsa-with-sha256 algorithm
   identifier appears in the algorithm field as an AlgorithmIdentifier,
   the encoding SHALL omit the parameters field.  That is, the
   AlgorithmIdentifier SHALL be a SEQUENCE of one component, the OID id-
   dsa-with-sha224 or id-dsa-with-sha256.

   Encoding rules for DSA signature values are specified in [RFC3279].

   Conforming CA implementations that generate DSA signatures for
   certificates or CRLs MUST generate such DSA signatures in accordance
   with all the requirements in Sections 4.1, 4.5, and 4.6 of
   [FIPS186-3].

   Conforming CA implementations that generate DSA signatures for
   certificates or CRLs MAY generate such DSA signatures in accordance
   with all the requirements and recommendations in [FIPS186-3], if they
   have a stated policy that requires conformance to [FIPS186-3].

3.2.  ECDSA Signature Algorithm

   The Elliptic Curve Digital Signature Algorithm (ECDSA) is defined in
   "Public Key Cryptography for the Financial Services Industry: The
   Elliptic Curve Digital Signature Standard (ECDSA)" [X9.62].  The
   ASN.1 OIDs used to specify that an ECDSA signature was generated
   using SHA-224, SHA-256, SHA-384, or SHA-512 are, respectively:







Dang, et al.                 Standards Track                    [Page 4]


RFC 5758                        DSA/ECDSA                   January 2010


   ecdsa-with-SHA224 OBJECT IDENTIFIER ::= { iso(1) member-body(2)
        us(840) ansi-X9-62(10045) signatures(4) ecdsa-with-SHA2(3) 1 }

   ecdsa-with-SHA256 OBJECT IDENTIFIER ::= { iso(1) member-body(2)
        us(840) ansi-X9-62(10045) signatures(4) ecdsa-with-SHA2(3) 2 }

   ecdsa-with-SHA384 OBJECT IDENTIFIER ::= { iso(1) member-body(2)
        us(840) ansi-X9-62(10045) signatures(4) ecdsa-with-SHA2(3) 3 }

   ecdsa-with-SHA512 OBJECT IDENTIFIER ::= { iso(1) member-body(2)
        us(840) ansi-X9-62(10045) signatures(4) ecdsa-with-SHA2(3) 4 }

   When the ecdsa-with-SHA224, ecdsa-with-SHA256, ecdsa-with-SHA384, or
   ecdsa-with-SHA512 algorithm identifier appears in the algorithm field
   as an AlgorithmIdentifier, the encoding MUST omit the parameters
   field.  That is, the AlgorithmIdentifier SHALL be a SEQUENCE of one
   component, the OID ecdsa-with-SHA224, ecdsa-with-SHA256, ecdsa-with-
   SHA384, or ecdsa-with-SHA512.

   Conforming CA implementations MUST specify the hash algorithm
   explicitly using the OIDs specified above when encoding ECDSA/SHA2
   signatures in certificates and CRLs.

   Conforming client implementations that process ECDSA signatures with
   any of the SHA2 hash algorithms when processing certificates and CRLs
   MUST recognize the corresponding OIDs specified above.

   Encoding rules for ECDSA signature values are specified in RFC 3279
   [RFC3279], Section 2.2.3, and RFC 5480 [RFC5480].

   Conforming CA implementations that generate ECDSA signatures in
   certificates or CRLs MUST generate such ECDSA signatures in
   accordance with all the requirements specified in Sections 7.2 and
   7.3 of [X9.62] or with all the requirements specified in Section
   4.1.3 of [SEC1].

   Conforming CA implementations that ECDSA signatures in certificates
   or CRLs MAY generate such ECDSA signatures in accordance with all the
   requirements and recommendations in [X9.62] or [SEC1] if they have a
   stated policy that requires conformance to [X9.62] or [SEC1].

4.  ASN.1 Module

   The OIDs of the SHA2 hash algorithms are in the RFC 4055 [RFC4055]
   ASN.1 module and the OIDs for DSA with SHA-224 and SHA-256 as well as
   ECDSA with SHA-224, SHA-256, SHA-384, and SHA-512 are defined in the
   RFC 5480 [RFC5480] ASN.1 module.




Dang, et al.                 Standards Track                    [Page 5]


RFC 5758                        DSA/ECDSA                   January 2010


5.  Security Considerations

   NIST has defined appropriate use of the hash functions in terms of
   the algorithm strengths and expected time frames for secure use in
   Special Publications (SPs) 800-78-1 [SP800-78-1], 800-57 [SP800-57],
   and 800-107 [SP800-107].  These documents can be used as guides to
   choose appropriate key sizes for various security scenarios.

   ANSI also provides security considerations for ECDSA in [X9.62].
   These security considerations may be used as a guide.

6.  References

6.1.  Normative References

   [RFC2119]    Bradner, S., "Key words for use in RFCs to Indicate
                Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC3279]    Bassham, L., Polk, W., and R. Housley, "Algorithms and
                Identifiers for the Internet X.509 Public Key
                Infrastructure Certificate and Certificate Revocation
                List (CRL) Profile", RFC 3279, April 2002.

   [RFC4055]    Schaad, J., Kaliski, B., and R. Housley, "Additional
                Algorithms and Identifiers for RSA Cryptography for use
                in the Internet X.509 Public Key Infrastructure
                Certificate and Certificate Revocation List (CRL)
                Profile", RFC 4055, June 2005.

   [RFC5480]    Turner, S., Brown, D., Yiu, K., Housley, R., and T.
                Polk, "Elliptic Curve Cryptography Subject Public Key
                Information", RFC 5480, March 2009.

   [RFC5280]    Cooper, D., Santesson, S., Farrell, S., Boeyen, S.,
                Housley, R., and W. Polk, "Internet X.509 Public Key
                Infrastructure Certificate and Certificate Revocation
                List (CRL) Profile", RFC 5280, May 2008.

   [FIPS180-3]  Federal Information Processing Standards Publication
                (FIPS PUB) 180-3, Secure Hash Standard (SHS), October
                2008.

   [FIPS186-3]  Federal Information Processing Standards Publication
                (FIPS PUB) 186-3, Digital Signature Standard (DSS), June
                2009.

   [SEC1]       Standards for Efficient Cryptography Group (SECG), SEC
                1: Elliptic Curve Cryptography, Version 2.0, 2009.



Dang, et al.                 Standards Track                    [Page 6]


RFC 5758                        DSA/ECDSA                   January 2010


   [X9.62]      X9.62-2005, "Public Key Cryptography for the Financial
                Services Industry: The Elliptic Curve Digital Signature
                Standard (ECDSA)", November, 2005.

6.2.  Informative References

   [SP800-107]  Quynh Dang, NIST, "Recommendation for Applications Using
                Approved Hash Algorithms", February 2009.

   [SP800-78-1] W. Timothy Polk, Donna, F. Dodson, William E. Burr,
                NIST, "Cryptographic Standards and Key Sizes for
                Personal Identity Verification", August 2007.

   [SP800-57]   Elaine Barker, William Barker, William E. Burr, NIST,
                "Recommendation for Key Management", August 2005.

7.  Acknowledgements

   The authors of this document would like to acknowledge great inputs
   for this document from Alfred Hoenes, Sean Turner, Katrin Hoeper, and
   many others from IETF community.  The authors also appreciate many
   great revision suggestions from Russ Housley and Paul Hoffman.





























Dang, et al.                 Standards Track                    [Page 7]


RFC 5758                        DSA/ECDSA                   January 2010


Authors' Addresses

   Quynh Dang
   NIST
   100 Bureau Drive, Stop 8930
   Gaithersburg, MD 20899-8930
   USA

   EMail: quynh.dang@nist.gov


   Stefan Santesson
   3xA Security (AAA-sec.com)
   Bjornstorp 744
   247 98 Genarp
   Sweden

   EMail: sts@aaa-sec.com


   Kathleen M. Moriarty
   RSA, The Security Division of EMC
   174 Middlesex Turnpike
   Bedford, MA 01730
   USA

   EMail: Moriarty_Kathleen@emc.com


   Daniel R. L. Brown
   Certicom Corp.
   5520 Explorer Drive
   Mississaug, ON L4W 5L1
   USA

   EMail: dbrown@certicom.com


   Tim Polk
   NIST
   100 Bureau Drive, Stop 8930
   Gaithersburg, MD 20899-8930
   USA

   EMail: tim.polk@nist.gov






Dang, et al.                 Standards Track                    [Page 8]


Html markup produced by rfcmarkup 1.129b, available from https://tools.ietf.org/tools/rfcmarkup/