RFC 2511 Internet X.509 Certificate Request Message Format

[Docs] [txt|pdf] [draft-ietf-pkix...] [Tracker] [Diff1] [Diff2]

Obsoleted by: 4211 PROPOSED STANDARD

Network Working Group                                           M. Myers
Request for Comments: 2511                                      VeriSign
Category: Standards Track                                       C. Adams
                                                    Entrust Technologies
                                                                 D. Solo
                                                                Citicorp
                                                                 D. Kemp
                                                                     DoD
                                                              March 1999


           Internet X.509 Certificate Request Message Format

Status of this Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (1999).  All Rights Reserved.

1.  Abstract

   This document describes the Certificate Request Message Format
   (CRMF).  This syntax is used to convey a request for a certificate to
   a Certification Authority (CA) (possibly via a Registration Authority
   (RA)) for the purposes of X.509 certificate production.  The request
   will typically include a public key and associated registration
   information.

   The key words "MUST", "REQUIRED", "SHOULD", "RECOMMENDED", and "MAY"
   in this document (in uppercase, as shown) are to be interpreted as
   described in RFC 2119.

2.  Overview

   Construction of a certification request involves the following steps:

   a)  A CertRequest value is constructed.  This value may include the
       public key, all or a portion of the end-entity's (EE's) name,
       other requested certificate fields, and additional control
       information related to the registration process.





Myers, et. al.              Standards Track                     [Page 1]


RFC 2511                  Internet X.509 CRMF                 March 1999


   b)  A proof of possession (of the private key corresponding to the
       public key for which a certificate is being requested) value may
       be calculated across the CertRequest value.

   c)  Additional registration information may be combined with the
       proof of possession value and the CertRequest structure to form a
       CertReqMessage.

   d)  The CertReqMessage is securely communicated to a CA. Specific
       means of secure transport are beyond the scope of this
       specification.

3. CertReqMessage Syntax

   A certificate request message is composed of the certificate request,
   an optional proof of possession field and an optional registration
   information field.

CertReqMessages ::= SEQUENCE SIZE (1..MAX) OF CertReqMsg

CertReqMsg ::= SEQUENCE {
    certReq   CertRequest,
    pop       ProofOfPossession  OPTIONAL,
    -- content depends upon key type
    regInfo   SEQUENCE SIZE(1..MAX) of AttributeTypeAndValue OPTIONAL }

   The proof of possession field is used to demonstrate that the entity
   to be associated with the certificate is actually in possession of
   the corresponding private key.  This field may be calculated across
   the contents of the certReq field and varies in structure and content
   by public key algorithm type and operational mode.

   The regInfo field SHOULD only contain supplementary information
   related to the context of the certification request when such
   information is required to fulfill a certification request.  This
   information MAY include subscriber contact information, billing
   information or other ancillary information useful to fulfillment of
   the certification request.

   Information directly related to certificate content SHOULD be
   included in the certReq content.  However, inclusion of additional
   certReq content by RAs may invalidate the pop field.  Data therefore
   intended for certificate content MAY be provided in regInfo.

   See Section 8 and Appendix B for example regInfo contents.






Myers, et. al.              Standards Track                     [Page 2]


RFC 2511                  Internet X.509 CRMF                 March 1999


4. Proof of Possession (POP)

   In order to prevent certain attacks and to allow a CA/RA to properly
   check the validity of the binding between an end entity and a key
   pair, the PKI management operations specified here make it possible
   for an end entity to prove that it has possession of (i.e., is able
   to use) the private key corresponding to the public key for which a
   certificate is requested.  A given CA/RA is free to choose how to
   enforce POP (e.g., out-of-band procedural means versus the CRMF in-
   band message) in its certification exchanges (i.e., this may be a
   policy issue).  However, it is MANDATED that CAs/RAs MUST enforce POP
   by some means because there are currently many non-PKIX operational
   protocols in use (various electronic mail protocols are one example)
   that do not explicitly check the binding between the end entity and
   the private key.  Until operational protocols that do verify the
   binding (for signature, encryption, and key agreement key pairs)
   exist, and are ubiquitous, this binding can only be assumed to have
   been verified by the CA/RA. Therefore, if the binding is not verified
   by the CA/RA, certificates in the Internet Public-Key Infrastructure
   end up being somewhat less meaningful.

   POP is accomplished in different ways depending on the type of key
   for which a certificate is requested. If a key can be used for
   multiple purposes (e.g., an RSA key) then any of the methods MAY be
   used.

   This specification allows for cases where POP is validated by the CA,
   the RA, or both.  Some policies may require the CA to verify POP
   during certification, in which case the RA MUST forward the end
   entity's CertRequest and ProofOfPossession fields unaltered to the
   CA, and as an option MAY also verify POP.  If the CA is not required
   by policy to verify POP, then the RA SHOULD forward the end entity's
   request and proof unaltered to the CA as above.  If this is not
   possible (for example because the RA verifies POP by an out-of-band
   method), then the RA MAY attest to the CA that the required proof has
   been validated. If the CA uses an out-of-band method to verify POP
   (such as physical delivery of CA-generated private keys), then the
   ProofOfPossession field is not used.

4.1 Signature Keys

   For signature keys, the end entity can sign a value to prove
   possession of the private key.








Myers, et. al.              Standards Track                     [Page 3]


RFC 2511                  Internet X.509 CRMF                 March 1999


4.2 Key Encipherment Keys

   For key encipherment keys, the end entity can provide the private key
   to the CA/RA, or can be required to decrypt a value in order to prove
   possession of the private key. Decrypting a value can be achieved
   either directly or indirectly.

   The direct method is for the RA/CA to issue a random challenge to
   which an immediate response by the end entity is required.

   The indirect method is to issue a certificate which is encrypted for
   the end entity (and have the end entity demonstrate its ability to
   decrypt this certificate in a confirmation message). This allows a CA
   to issue a certificate in a form which can only be used by the
   intended end entity.

4.3 Key Agreement Keys

   For key agreement keys, the end entity can use any of the three
   methods given in Section 5.2 for encryption keys.  For the direct and
   indirect methods, the end entity and the PKI management entity (i.e.,
   CA or RA) must establish a shared secret key in order to prove that
   the end entity has possession of the private key (i.e., in order to
   decrypt the encrypted certificate or to construct the response to the
   issued challenge).  Note that this need not impose any restrictions
   on the keys that can be certified by a given CA -- in particular, for
   Diffie-Hellman keys the end entity may freely choose its algorithm
   parameters -- provided that the CA can generate a short-term (or
   one-time) key pair with the appropriate parameters when necessary.

   The end entity may also MAC the certificate request (using a shared
   secret key derived from a Diffie-Hellman computation) as a fourth
   alternative for demonstrating POP.  This option may be used only if
   the CA already has a DH certificate that is known to the end entity
   and if the EE is willing to use the CA's DH parameters.

4.4 Proof of Possession Syntax

   ProofOfPossession ::= CHOICE {
       raVerified        [0] NULL,
       -- used if the RA has already verified that the requester is in
       -- possession of the private key
       signature         [1] POPOSigningKey,
       keyEncipherment   [2] POPOPrivKey,
       keyAgreement      [3] POPOPrivKey }

   POPOSigningKey ::= SEQUENCE {
       poposkInput         [0] POPOSigningKeyInput OPTIONAL,



Myers, et. al.              Standards Track                     [Page 4]


RFC 2511                  Internet X.509 CRMF                 March 1999


       algorithmIdentifier     AlgorithmIdentifier,
       signature               BIT STRING }
       -- The signature (using "algorithmIdentifier") is on the
       -- DER-encoded value of poposkInput.  NOTE: If the CertReqMsg
       -- certReq CertTemplate contains the subject and publicKey values,
       -- then poposkInput MUST be omitted and the signature MUST be
       -- computed on the DER-encoded value of CertReqMsg certReq.  If
       -- the CertReqMsg certReq CertTemplate does not contain the public
       -- key and subject values, then poposkInput MUST be present and
       -- MUST be signed.  This strategy ensures that the public key is
       -- not present in both the poposkInput and CertReqMsg certReq
       -- CertTemplate fields.

   POPOSigningKeyInput ::= SEQUENCE {
       authInfo            CHOICE {
           sender              [0] GeneralName,
           -- used only if an authenticated identity has been
           -- established for the sender (e.g., a DN from a
           -- previously-issued and currently-valid certificate)
           publicKeyMAC        PKMACValue },
           -- used if no authenticated GeneralName currently exists for
           -- the sender; publicKeyMAC contains a password-based MAC
           -- on the DER-encoded value of publicKey
       publicKey           SubjectPublicKeyInfo }  -- from CertTemplate

   PKMACValue ::= SEQUENCE {
      algId  AlgorithmIdentifier,
      -- the algorithm value shall be PasswordBasedMac
      --     {1 2 840 113533 7 66 13}
      -- the parameter value is PBMParameter
      value  BIT STRING }

   POPOPrivKey ::= CHOICE {
       thisMessage       [0] BIT STRING,
       -- posession is proven in this message (which contains the private
       -- key itself (encrypted for the CA))
       subsequentMessage [1] SubsequentMessage,
       -- possession will be proven in a subsequent message
       dhMAC             [2] BIT STRING }
       -- for keyAgreement (only), possession is proven in this message
       -- (which contains a MAC (over the DER-encoded value of the
       -- certReq parameter in CertReqMsg, which must include both subject
       -- and publicKey) based on a key derived from the end entity's
       -- private DH key and the CA's public DH key);
       -- the dhMAC value MUST be calculated as per the directions given
       -- in Appendix A.

   SubsequentMessage ::= INTEGER {



Myers, et. al.              Standards Track                     [Page 5]


RFC 2511                  Internet X.509 CRMF                 March 1999


       encrCert (0),
       -- requests that resulting certificate be encrypted for the
       -- end entity (following which, POP will be proven in a
       -- confirmation message)
       challengeResp (1) }
       -- requests that CA/RA engage in challenge-response exchange with
       -- end entity in order to prove private key possession

   It is expected that protocols which incorporate this specification
   will include the confirmation and challenge-response messages
   necessary to a complete protocol.

4.4.1  Use of Password-Based MAC

   The following algorithm SHALL be used when publicKeyMAC is used in
   POPOSigningKeyInput to prove the authenticity of a request.

   PBMParameter ::= SEQUENCE {
         salt                OCTET STRING,
         owf                 AlgorithmIdentifier,
         -- AlgId for a One-Way Function (SHA-1 recommended)
         iterationCount      INTEGER,
         -- number of times the OWF is applied
         mac                 AlgorithmIdentifier
         -- the MAC AlgId (e.g., DES-MAC, Triple-DES-MAC [PKCS11],
   }   -- or HMAC [RFC2104, RFC2202])

   The process of using PBMParameter to compute publicKeyMAC and so
   authenticate the origin of a public key certification request
   consists of two stages. The first stage uses shared secret
   information to produce a MAC key. The second stage MACs the public
   key in question using this MAC key to produce an authenticated value.

   Initialization of the first stage of algorithm assumes the existence
   of a shared secret distributed in a trusted fashion between CA/RA and
   end-entity.  The salt value is appended to the shared secret and the
   one way function (owf) is applied iterationCount times, where the
   salted secret is the input to the first iteration and, for each
   successive iteration, the input is set to be the output of the
   previous iteration, yielding a key K.

   In the second stage, K and the public key are inputs to HMAC as
   documented in [HMAC] to produce a value for publicKeyMAC as follows:

   publicKeyMAC = Hash( K XOR opad, Hash( K XOR ipad, public key) )

   where ipad and opad are defined in [RFC2104].




Myers, et. al.              Standards Track                     [Page 6]


RFC 2511                  Internet X.509 CRMF                 March 1999


   The AlgorithmIdentifier for owf SHALL be SHA-1 {1 3 14 3 2 26} and
   for mac SHALL be HMAC-SHA1 {1 3 6 1 5 5 8 1 2}.

5.  CertRequest syntax

   The CertRequest syntax consists of a request identifier, a template
   of certificate content, and an optional sequence of control
   information.

CertRequest ::= SEQUENCE {
    certReqId     INTEGER,          -- ID for matching request and reply
    certTemplate  CertTemplate,  -- Selected fields of cert to be issued
    controls      Controls OPTIONAL }   -- Attributes affecting issuance

CertTemplate ::= SEQUENCE {
    version      [0] Version               OPTIONAL,
    serialNumber [1] INTEGER               OPTIONAL,
    signingAlg   [2] AlgorithmIdentifier   OPTIONAL,
    issuer       [3] Name                  OPTIONAL,
    validity     [4] OptionalValidity      OPTIONAL,
    subject      [5] Name                  OPTIONAL,
    publicKey    [6] SubjectPublicKeyInfo  OPTIONAL,
    issuerUID    [7] UniqueIdentifier      OPTIONAL,
    subjectUID   [8] UniqueIdentifier      OPTIONAL,
    extensions   [9] Extensions            OPTIONAL }

  OptionalValidity ::= SEQUENCE {
      notBefore  [0] Time OPTIONAL,
      notAfter   [1] Time OPTIONAL } --at least one must be present

  Time ::= CHOICE {
      utcTime        UTCTime,
      generalTime    GeneralizedTime }

6. Controls Syntax

   The generator of a CertRequest may include one or more control values
   pertaining to the processing of the request.

   Controls  ::= SEQUENCE SIZE(1..MAX) OF AttributeTypeAndValue

   The following controls are defined (it is recognized that this list
   may expand over time):  regToken; authenticator; pkiPublicationInfo;
   pkiArchiveOptions; oldCertID; protocolEncrKey.







Myers, et. al.              Standards Track                     [Page 7]


RFC 2511                  Internet X.509 CRMF                 March 1999


6.1 Registration Token Control

   A regToken control contains one-time information (either based on a
   secret value or on knowledge) intended to be used by the CA to verify
   the identity of the subject prior to issuing a certificate.  Upon
   receipt of a certification request containing a value for regToken,
   the receiving CA verifies the information in order to confirm the
   identity claimed in the certification request.

   The value for regToken may be generated by the CA and provided out of
   band to the subscriber, or may otherwise be available to both the CA
   and the subscriber.  The security of any out-of-band exchange should
   be commensurate with the risk of the CA accepting an intercepted
   value from someone other than the intended subscriber.

   The regToken control would typically be used only for initialization
   of an end entity into the PKI, whereas the authenticator control (see
   Section 7.2) would typically be used for initial as well as
   subsequent certification requests.

   In some instances of use the value for regToken could be a text
   string or a numeric quantity such as a random number.  The value in
   the latter case could be encoded either as a binary quantity or as a
   text string representation of the binary quantity.  To ensure a
   uniform encoding of values regardless of the nature of the quantity,
   the encoding of regToken SHALL be UTF8.

6.2 Authenticator Control.

   An authenticator control contains information used in an ongoing
   basis to establish a non-cryptographic check of identity in
   communication with the CA.  Examples include:  mother's maiden name,
   last four digits of social security number, or other knowledge-based
   information shared with the subscriber's CA; a hash of such
   information; or other information produced for this purpose.  The
   value for an authenticator control may be generated by the subscriber
   or by the CA.

   In some instances of use the value for regToken could be a text
   string or a numeric quantity such as a random number.  The value in
   the latter case could be encoded either as a binary quantity or as a
   text string representation of the binary quantity.  To ensure a
   uniform encoding of values regardless of the nature of the quantity,
   the encoding of authenticator SHALL be UTF8.







Myers, et. al.              Standards Track                     [Page 8]


RFC 2511                  Internet X.509 CRMF                 March 1999


6.3 Publication Information Control

   The pkiPublicationInfo control enables subscribers to control the
   CA's publication of the certificate.  It is defined by the following
   syntax:

   PKIPublicationInfo ::= SEQUENCE {
        action     INTEGER {
                     dontPublish (0),
                     pleasePublish (1) },
        pubInfos  SEQUENCE SIZE (1..MAX) OF SinglePubInfo OPTIONAL }


          -- pubInfos MUST NOT be present if action is "dontPublish"
          -- (if action is "pleasePublish" and pubInfos is omitted,
          -- "dontCare" is assumed)

   SinglePubInfo ::= SEQUENCE {
         pubMethod    INTEGER {
             dontCare    (0),
             x500        (1),
             web         (2),
             ldap        (3) },
         pubLocation  GeneralName OPTIONAL }

   If the dontPublish option is chosen, the requester indicates that the
   PKI should not publish the certificate (this may indicate that the
   requester intends to publish the certificate him/herself).

   If the dontCare method is chosen, or if the PKIPublicationInfo
   control is omitted from the request, the requester indicates that the
   PKI MAY publish the certificate using whatever means it chooses.

   If the requester wishes the certificate to appear in at least some
   locations but wishes to enable the CA to make the certificate
   available in other repositories, set two values of SinglePubInfo for
   pubInfos: one with x500, web or ldap value and one with dontCare.

   The pubLocation field, if supplied, indicates where the requester
   would like the certificate to be found (note that the CHOICE within
   GeneralName includes a URL and an IP address, for example).

6.4  Archive Options Control

   The pkiArchiveOptions control enables subscribers to supply
   information needed to establish an archive of the private key
   corresponding to the public key of the certification request.  It is
   defined by the following syntax:



Myers, et. al.              Standards Track                     [Page 9]


RFC 2511                  Internet X.509 CRMF                 March 1999


PKIArchiveOptions ::= CHOICE {
      encryptedPrivKey     [0] EncryptedKey,
      -- the actual value of the private key
      keyGenParameters     [1] KeyGenParameters,
      -- parameters which allow the private key to be re-generated
      archiveRemGenPrivKey [2] BOOLEAN }
      -- set to TRUE if sender wishes receiver to archive the private
      -- key of a key pair which the receiver generates in response to
      -- this request; set to FALSE if no archival is desired.

EncryptedKey ::= CHOICE {
      encryptedValue        EncryptedValue,
      envelopedData     [0] EnvelopedData }
      -- The encrypted private key MUST be placed in the envelopedData
      -- encryptedContentInfo encryptedContent OCTET STRING.

EncryptedValue ::= SEQUENCE {
      intendedAlg   [0] AlgorithmIdentifier  OPTIONAL,
      -- the intended algorithm for which the value will be used
      symmAlg       [1] AlgorithmIdentifier  OPTIONAL,
      -- the symmetric algorithm used to encrypt the value
      encSymmKey    [2] BIT STRING           OPTIONAL,
      -- the (encrypted) symmetric key used to encrypt the value
      keyAlg        [3] AlgorithmIdentifier  OPTIONAL,
      -- algorithm used to encrypt the symmetric key
      valueHint     [4] OCTET STRING         OPTIONAL,
      -- a brief description or identifier of the encValue content
      -- (may be meaningful only to the sending entity, and used only
      -- if EncryptedValue might be re-examined by the sending entity
      -- in the future)
        encValue       BIT STRING }

KeyGenParameters ::= OCTET STRING

   An alternative to sending the key is to send the information about
   how to re-generate the key using the KeyGenParameters choice (e.g.,
   for many RSA implementations one could send the first random numbers
   tested for primality). The actual syntax for this parameter may be
   defined in a subsequent version of this document or in another
   standard.











Myers, et. al.              Standards Track                    [Page 10]


RFC 2511                  Internet X.509 CRMF                 March 1999


6.5  OldCert ID Control

   If present, the OldCertID control specifies the certificate to be
   updated by the current certification request.  The syntax of its
   value is:

   CertId ::= SEQUENCE {
         issuer           GeneralName,
         serialNumber     INTEGER
     }

6.6  Protocol Encryption Key Control

   If present, the protocolEncrKey control specifies a key the CA is to
   use in encrypting a response to CertReqMessages.

   This control can be used when a CA has information to send to the
   subscriber that needs to be encrypted.  Such information includes a
   private key generated by the CA for use by the subscriber.

   The encoding of protocolEncrKey SHALL be SubjectPublicKeyInfo.

7.  Object Identifiers

   The OID id-pkix has the value

   id-pkix  OBJECT IDENTIFIER  ::= { iso(1) identified-organization(3)
   dod(6) internet(1) security(5) mechanisms(5) pkix(7) }

   -- arc for Internet X.509 PKI protocols and their components
   id-pkip  OBJECT IDENTIFIER :: { id-pkix pkip(5) }

   -- Registration Controls in CRMF
   id-regCtrl  OBJECT IDENTIFIER ::= { id-pkip regCtrl(1) }
   id-regCtrl-regToken            OBJECT IDENTIFIER ::= { id-regCtrl 1 }
   id-regCtrl-authenticator       OBJECT IDENTIFIER ::= { id-regCtrl 2 }
   id-regCtrl-pkiPublicationInfo  OBJECT IDENTIFIER ::= { id-regCtrl 3 }
   id-regCtrl-pkiArchiveOptions   OBJECT IDENTIFIER ::= { id-regCtrl 4 }
   id-regCtrl-oldCertID           OBJECT IDENTIFIER ::= { id-regCtrl 5 }
   id-regCtrl-protocolEncrKey     OBJECT IDENTIFIER ::= { id-regCtrl 6 }

   -- Registration Info in CRMF
   id-regInfo       OBJECT IDENTIFIER ::= { id-pkip id-regInfo(2) }
   id-regInfo-asciiPairs    OBJECT IDENTIFIER ::= { id-regInfo 1 }
   --with syntax OCTET STRING
   id-regInfo-certReq       OBJECT IDENTIFIER ::= { id-regInfo 2 }
   --with syntax CertRequest




Myers, et. al.              Standards Track                    [Page 11]


RFC 2511                  Internet X.509 CRMF                 March 1999


8.  Security Considerations

   The security of CRMF delivery is reliant upon the security mechanisms
   of the protocol or process used to communicate with CAs.  Such
   protocol or process needs to ensure the integrity, data origin
   authenticity, and privacy of the message.  Encryption of a CRMF is
   strongly recommended if it contains subscriber-sensitive information
   and if the CA has an encryption certificate that is known to the end
   entity.

9. References

   [HMAC] Krawczyk, H., Bellare, M. and R. Canetti, "HMAC:  Keyed-
          Hashing for Message Authentication", RFC 2104, February 1997.

10. Acknowledgments

   The authors gratefully acknowledge the contributions of Barbara Fox,
   Warwick Ford, Russ Housley and John Pawling, whose review and
   comments significantly clarified and improved the utility of this
   specification.






























Myers, et. al.              Standards Track                    [Page 12]


RFC 2511                  Internet X.509 CRMF                 March 1999


11. Authors' Addresses

   Michael Myers
   VeriSign, Inc.
   1390 Shorebird Way
   Mountain View, CA  94019

   EMail: mmyers@verisign.com


   Carlisle Adams
   Entrust Technologies
   750 Heron Road, Suite E08
   Ottawa, Canada, K1V 1A7

   EMail: cadams@entrust.com


   Dave Solo
   Citicorp
   666 Fifth Ave, 3rd Floor
   New York, Ny 10103

   EMail: david.solo@citicorp.com


   David Kemp
   National Security Agency
   Suite 6734
   9800 Savage Road
   Fort Meade, MD 20755

   EMail: dpkemp@missi.ncsc.mil


















Myers, et. al.              Standards Track                    [Page 13]


RFC 2511                  Internet X.509 CRMF                 March 1999


Appendix A. Constructing "dhMAC"

   This Appendix describes the method for computing the bit string
   "dhMAC" in the proof-of-possession POPOPrivKey structure for Diffie-
   Hellman certificate requests.

   1. The entity generates a DH public/private key-pair.

       The DH parameters used to calculate the public SHOULD be those
       specified in the CA's DH certificate.

       From CA's DH certificate:
          CApub = g^x mod p   (where g and p are the established DH
                               parameters and x is the CA's private
                               DH component)
       For entity E:
          DH private value = y
          Epub = DH public value = g^y mod p

   2. The MACing process will then consist of the following steps.

   a) The value of the certReq field is DER encoded, yielding a binary
      string. This will be the 'text' referred to in [HMAC], the data to
      which HMAC-SHA1 is applied.

   b) A shared DH secret is computed, as follows,
                      shared secret = Kec = g^xy mod p

      [This is done by the entity E as CApub^y and by the CA as Epub^x,
      where CApub is retrieved from the CA's DH certificate and Epub is
      retrieved from the actual certification request.]

   c)  A key K is derived from the shared secret Kec and the subject and
      issuer names in the CA's certificate as follows:

      K = SHA1(DER-encoded-subjectName | Kec | DER-encoded-issuerName)

      where "|" means concatenation.  If subjectName in the CA
      certificate is an empty SEQUENCE then DER-encoded-subjectAltName
      should be used instead; similarly, if issuerName is an empty
      SEQUENCE then DER-encoded-issuerAltName should be used instead.

   d) Compute HMAC-SHA1 over the data 'text' as per [RFC2104] as:
         SHA1(K XOR opad, SHA1(K XOR ipad, text))







Myers, et. al.              Standards Track                    [Page 14]


RFC 2511                  Internet X.509 CRMF                 March 1999


      where,
         opad (outer pad) = the byte 0x36 repeated 64 times
      and
         ipad (inner pad) = the byte 0x5C repeated 64 times.


      Namely,

         (1) Append zeros to the end of K to create a 64 byte string
             (e.g., if K is of length 16 bytes it will be appended with
             48 zero bytes 0x00).
         (2) XOR (bitwise exclusive-OR) the 64 byte string computed in
             step (1) with ipad.
         (3) Append the data stream 'text' to the 64 byte string
             resulting from step (2).
         (4) Apply SHA1 to the stream generated in step (3).
         (5) XOR (bitwise exclusive-OR) the 64 byte string computed in
             step (1) with opad.
         (6) Append the SHA1 result from step (4) to the 64 byte string
             resulting from step (5).
         (7) Apply SHA1 to the stream generated in step (6) and output
             the result.

          Sample code is also provided in [RFC2104, RFC2202].

   e) The output of (d) is encoded as a BIT STRING (the value "dhMAC").

   3. The proof-of-possession process requires the CA to carry out
      steps (a) through (d) and then simply compare the result of step
      (d) with what it received as the "dhMAC" value. If they match then
      the following can be concluded.

       1) The Entity possesses the private key corresponding to the
          public key in the certification request (because it needed the
          private key to calculate the shared secret).

       2) Only the intended CA can actually verify the request (because
          the CA requires its own private key to compute the same shared
          secret).  This helps to protect from rogue CAs.

References

   [RFC2104] Krawczyk, H., Bellare, M. and R. Canetti, "HMAC:  Keyed
             Hashing for Message Authentication", RFC 2104, February
             1997.

   [RFC2202] Cheng, P. and R. Glenn, "Test Cases for HMAC-MD5 and HMAC-
             SHA-1", RFC 2202, September 1997.



Myers, et. al.              Standards Track                    [Page 15]


RFC 2511                  Internet X.509 CRMF                 March 1999


Acknowledgements

   The details of this Appendix were provided by Hemma Prafullchandra.

   Appendix B. Use of RegInfo for Name-Value Pairs

   The "value" field of the id-regInfo-utf8Pairs OCTET STRING (with
   "tag" field equal to 12 and appropriate "length" field) will contain
   a series of UTF8 name/value pairs.

   This Appendix lists some common examples of such pairs for the
   purpose of promoting interoperability among independent
   implementations of this specification.  It is recognized that this
   list is not exhaustive and will grow with time and implementation
   experience.

B.1. Example Name/Value Pairs

   When regInfo is used to convey one or more name-value pairs (via id-
   regInfo-utf8Pairs), the first and subsequent pairs SHALL be
   structured as follows:

      [name?value][%name?value]*%

   This string is then encoded into an OCTET STRING and placed into the
   regInfo SEQUENCE.

   Reserved characters are encoded using the %xx mechanism of [RFC1738],
   unless they are used for their reserved purposes.

   The following table defines a recommended set of named elements.
   The value in the column "Name Value" is the exact text string that
   will appear in the regInfo.

      Name Value
      ----------
      version            -- version of this variation of regInfo use
      corp_company       -- company affiliation of subscriber
      org_unit           -- organizational unit
      mail_firstName     -- personal name component
      mail_middleName    -- personal name component
      mail_lastName      -- personal name component
      mail_email         -- subscriber's email address
      jobTitle           -- job title of subscriber
      employeeID         -- employee identification number or string

   mailStop           -- mail stop
      issuerName         -- name of CA



Myers, et. al.              Standards Track                    [Page 16]


RFC 2511                  Internet X.509 CRMF                 March 1999


      subjectName        -- name of Subject
      validity           -- validity interval

   For example:

      version?1%corp_company?Acme, Inc.%org_unit?Engineering%
      mail_firstName?John%mail_lastName?Smith%jobTitle?Team Leader%
      mail_email?john@acme.com%

B.1.1. IssuerName, SubjectName and Validity Value Encoding

   When they appear in id-regInfo-utf8Pairs syntax as named elements,
   the encoding of values for issuerName, subjectName and validity SHALL
   use the following syntax.  The characters [] indicate an optional
   field, ::= and | have their usual BNF meanings, and all other symbols
   (except spaces which are insignificant) outside non-terminal names
   are terminals.  Alphabetics are case-sensitive.

      issuerName  ::= <names>
      subjectName ::= <names>
      <names>     ::= <name> | <names>:<name>

      <validity>  ::= validity ? [<notbefore>]-[<notafter>]
      <notbefore> ::= <time>
      <notafter>  ::= <time>

   Where <time> is UTC time in the form YYYYMMDD[HH[MM[SS]]].  HH, MM,
   and SS default to 00 and are omitted if at the and of value 00.

   Example validity encoding:

      validity?-19991231%

   is a validity interval with no value for notBefore and a value of
   December 31, 1999 for notAfter.

   Each name comprises a single character name form identifier followed
   by a name value of one or UTF8 characters. Within a name value, when
   it is necessary to disambiguate a character which has formatting
   significance at an outer level, the escape sequence %xx SHALL be
   used, where xx represents the hex value for the encoding concerned.
   The percent symbol is represented by %%.

      <name> ::= X<xname>|O<oname>|E<ename>|D<dname>|U<uname>|I<iname>

   Name forms and value formats are as follows:

   X.500 directory name form (identifier "X"):



Myers, et. al.              Standards Track                    [Page 17]


RFC 2511                  Internet X.509 CRMF                 March 1999


   <xname> ::= <rdns>
      <rdns>  ::= <rdn> | <rdns> , <rdn>
      <rdn>   ::= <avas>
      <avas>  ::= <ava> | <avas> + <ava>
      <ava>   ::= <attyp> = <avalue>
      <attyp> ::= OID.<oid> | <stdat>

   Standard attribute type <stdat> is an alphabetic attribute type
   identifier from the following set:

      C      (country)
      L      (locality)
      ST     (state or province)
      O      (organization)
      OU     (organizational unit)
      CN     (common name)
      STREET (street address)
      E      (E-mail address).

   <avalue> is a name component in the form of a UTF8 character string
   of 1 to 64 characters, with the restriction that in the IA5 subset of
   UTF8 only the characters of ASN.1 PrintableString may be used.

   Other name form (identifier "O"):
      <oname> ::= <oid> , <utf8string>

   E-mail address (rfc822name) name form (identifier "E"):
      <ename> ::= <ia5string>

   DNS name form (identifier "D"):
      <dname> ::= <ia5string>

   URI name form (identifier "U"):
      <uname> ::= <ia5string>

   IP address (identifier "I"):
      <iname> ::= <oid>

   For example:

      issuerName?XOU=Our CA,O=Acme,C=US%
      subjectName?XCN=John Smith, O=Acme, C=US, E=john@acme.com%

References

   [RFC1738]  Berners-Lee, T., Masinter, L. and M.  McCahill,
             "Uniform Resource Locators (URL)", RFC 1738, December 1994.




Myers, et. al.              Standards Track                    [Page 18]


RFC 2511                  Internet X.509 CRMF                 March 1999


Appendix C. ASN.1 Structures and OIDs

PKIXCRMF {iso(1) identified-organization(3) dod(6) internet(1)
   security(5) mechanisms(5) pkix(7) id-mod(0) id-mod-crmf(5)}

CRMF DEFINITIONS IMPLICIT TAGS ::=
BEGIN

IMPORTS
     -- Directory Authentication Framework (X.509)
        Version, AlgorithmIdentifier, Name, Time,
        SubjectPublicKeyInfo, Extensions, UniqueIdentifier
           FROM PKIX1Explicit88 {iso(1) identified-organization(3) dod(6)
               internet(1) security(5) mechanisms(5) pkix(7) id-mod(0)
               id-pkix1-explicit-88(1)}

     -- Certificate Extensions (X.509)
        GeneralName
           FROM PKIX1Implicit88 {iso(1) identified-organization(3) dod(6)
                  internet(1) security(5) mechanisms(5) pkix(7) id-mod(0)
                  id-pkix1-implicit-88(2)}

     -- Cryptographic Message Syntax
        EnvelopedData
           FROM CryptographicMessageSyntax { iso(1) member-body(2)
                us(840) rsadsi(113549) pkcs(1) pkcs-9(9) smime(16)
                modules(0) cms(1) };

CertReqMessages ::= SEQUENCE SIZE (1..MAX) OF CertReqMsg

CertReqMsg ::= SEQUENCE {
    certReq   CertRequest,
    pop       ProofOfPossession  OPTIONAL,
    -- content depends upon key type
    regInfo   SEQUENCE SIZE(1..MAX) OF AttributeTypeAndValue OPTIONAL }

CertRequest ::= SEQUENCE {
    certReqId     INTEGER,          -- ID for matching request and reply
    certTemplate  CertTemplate,  -- Selected fields of cert to be issued
    controls      Controls OPTIONAL }   -- Attributes affecting issuance

CertTemplate ::= SEQUENCE {
    version      [0] Version               OPTIONAL,
    serialNumber [1] INTEGER               OPTIONAL,
    signingAlg   [2] AlgorithmIdentifier   OPTIONAL,
    issuer       [3] Name                  OPTIONAL,
    validity     [4] OptionalValidity      OPTIONAL,
    subject      [5] Name                  OPTIONAL,



Myers, et. al.              Standards Track                    [Page 19]


RFC 2511                  Internet X.509 CRMF                 March 1999


    publicKey    [6] SubjectPublicKeyInfo  OPTIONAL,
    issuerUID    [7] UniqueIdentifier      OPTIONAL,
    subjectUID   [8] UniqueIdentifier      OPTIONAL,
    extensions   [9] Extensions            OPTIONAL }

OptionalValidity ::= SEQUENCE {
    notBefore  [0] Time OPTIONAL,
    notAfter   [1] Time OPTIONAL } --at least one MUST be present

Controls  ::= SEQUENCE SIZE(1..MAX) OF AttributeTypeAndValue

AttributeTypeAndValue ::= SEQUENCE {
    type         OBJECT IDENTIFIER,
    value        ANY DEFINED BY type }

ProofOfPossession ::= CHOICE {
    raVerified        [0] NULL,
    -- used if the RA has already verified that the requester is in
    -- possession of the private key
    signature         [1] POPOSigningKey,
    keyEncipherment   [2] POPOPrivKey,
    keyAgreement      [3] POPOPrivKey }

POPOSigningKey ::= SEQUENCE {
    poposkInput           [0] POPOSigningKeyInput OPTIONAL,
    algorithmIdentifier   AlgorithmIdentifier,
    signature             BIT STRING }
    -- The signature (using "algorithmIdentifier") is on the
    -- DER-encoded value of poposkInput.  NOTE: If the CertReqMsg
    -- certReq CertTemplate contains the subject and publicKey values,
    -- then poposkInput MUST be omitted and the signature MUST be
    -- computed on the DER-encoded value of CertReqMsg certReq.  If
    -- the CertReqMsg certReq CertTemplate does not contain the public
    -- key and subject values, then poposkInput MUST be present and
    -- MUST be signed.  This strategy ensures that the public key is
    -- not present in both the poposkInput and CertReqMsg certReq
    -- CertTemplate fields.

POPOSigningKeyInput ::= SEQUENCE {
    authInfo            CHOICE {
        sender              [0] GeneralName,
        -- used only if an authenticated identity has been
        -- established for the sender (e.g., a DN from a
        -- previously-issued and currently-valid certificate
        publicKeyMAC        PKMACValue },
        -- used if no authenticated GeneralName currently exists for
        -- the sender; publicKeyMAC contains a password-based MAC
        -- on the DER-encoded value of publicKey



Myers, et. al.              Standards Track                    [Page 20]


RFC 2511                  Internet X.509 CRMF                 March 1999


    publicKey           SubjectPublicKeyInfo }  -- from CertTemplate

PKMACValue ::= SEQUENCE {
   algId  AlgorithmIdentifier,
   -- algorithm value shall be PasswordBasedMac {1 2 840 113533 7 66 13}
   -- parameter value is PBMParameter
   value  BIT STRING }

PBMParameter ::= SEQUENCE {
      salt                OCTET STRING,
      owf                 AlgorithmIdentifier,
      -- AlgId for a One-Way Function (SHA-1 recommended)
      iterationCount      INTEGER,
      -- number of times the OWF is applied
      mac                 AlgorithmIdentifier
      -- the MAC AlgId (e.g., DES-MAC, Triple-DES-MAC [PKCS11],
}   -- or HMAC [RFC2104, RFC2202])

POPOPrivKey ::= CHOICE {
    thisMessage       [0] BIT STRING,
    -- posession is proven in this message (which contains the private
    -- key itself (encrypted for the CA))
    subsequentMessage [1] SubsequentMessage,
    -- possession will be proven in a subsequent message
    dhMAC             [2] BIT STRING }
    -- for keyAgreement (only), possession is proven in this message
    -- (which contains a MAC (over the DER-encoded value of the
    -- certReq parameter in CertReqMsg, which MUST include both subject
    -- and publicKey) based on a key derived from the end entity's
    -- private DH key and the CA's public DH key);
    -- the dhMAC value MUST be calculated as per the directions given
    -- in Appendix A.

SubsequentMessage ::= INTEGER {
    encrCert (0),
    -- requests that resulting certificate be encrypted for the
    -- end entity (following which, POP will be proven in a
    -- confirmation message)
    challengeResp (1) }
    -- requests that CA engage in challenge-response exchange with
    -- end entity in order to prove private key possession

-- Object identifier assignments --

id-pkix  OBJECT IDENTIFIER  ::= { iso(1) identified-organization(3)
dod(6) internet(1) security(5) mechanisms(5) 7 }

-- arc for Internet X.509 PKI protocols and their components



Myers, et. al.              Standards Track                    [Page 21]


RFC 2511                  Internet X.509 CRMF                 March 1999


id-pkip  OBJECT IDENTIFIER ::= { id-pkix 5 }

-- Registration Controls in CRMF
id-regCtrl OBJECT IDENTIFIER ::= { id-pkip 1 }

-- The following definition may be uncommented for use with
-- ASN.1 compilers which do not understand UTF8String.

-- UTF8String ::= [UNIVERSAL 12] IMPLICIT OCTET STRING

id-regCtrl-regToken OBJECT IDENTIFIER ::= { id-regCtrl 1 }
--with syntax:
RegToken ::= UTF8String

id-regCtrl-authenticator OBJECT IDENTIFIER ::= { id-regCtrl 2 }
--with syntax:
Authenticator ::= UTF8String

id-regCtrl-pkiPublicationInfo OBJECT IDENTIFIER ::= { id-regCtrl 3 }
--with syntax:

PKIPublicationInfo ::= SEQUENCE {
   action     INTEGER {
                dontPublish (0),
                pleasePublish (1) },
   pubInfos  SEQUENCE SIZE (1..MAX) OF SinglePubInfo OPTIONAL }
     -- pubInfos MUST NOT be present if action is "dontPublish"
     -- (if action is "pleasePublish" and pubInfos is omitted,
     -- "dontCare" is assumed)

SinglePubInfo ::= SEQUENCE {
    pubMethod    INTEGER {
        dontCare    (0),
        x500        (1),
        web         (2),
        ldap        (3) },
    pubLocation  GeneralName OPTIONAL }

id-regCtrl-pkiArchiveOptions     OBJECT IDENTIFIER ::= { id-regCtrl 4 }
--with syntax:
PKIArchiveOptions ::= CHOICE {
    encryptedPrivKey     [0] EncryptedKey,
    -- the actual value of the private key
    keyGenParameters     [1] KeyGenParameters,
    -- parameters which allow the private key to be re-generated
    archiveRemGenPrivKey [2] BOOLEAN }
    -- set to TRUE if sender wishes receiver to archive the private
    -- key of a key pair which the receiver generates in response to



Myers, et. al.              Standards Track                    [Page 22]


RFC 2511                  Internet X.509 CRMF                 March 1999


    -- this request; set to FALSE if no archival is desired.

EncryptedKey ::= CHOICE {
    encryptedValue        EncryptedValue,
    envelopedData     [0] EnvelopedData }
    -- The encrypted private key MUST be placed in the envelopedData
    -- encryptedContentInfo encryptedContent OCTET STRING.


EncryptedValue ::= SEQUENCE {
    intendedAlg   [0] AlgorithmIdentifier  OPTIONAL,
    -- the intended algorithm for which the value will be used
    symmAlg       [1] AlgorithmIdentifier  OPTIONAL,
    -- the symmetric algorithm used to encrypt the value
    encSymmKey    [2] BIT STRING           OPTIONAL,
    -- the (encrypted) symmetric key used to encrypt the value
    keyAlg        [3] AlgorithmIdentifier  OPTIONAL,
    -- algorithm used to encrypt the symmetric key
    valueHint     [4] OCTET STRING         OPTIONAL,
    -- a brief description or identifier of the encValue content
    -- (may be meaningful only to the sending entity, and used only
    -- if EncryptedValue might be re-examined by the sending entity
    -- in the future)
    encValue       BIT STRING }
    -- the encrypted value itself

KeyGenParameters ::= OCTET STRING

id-regCtrl-oldCertID          OBJECT IDENTIFIER ::= { id-regCtrl 5 }
--with syntax:
OldCertId ::= CertId

CertId ::= SEQUENCE {
    issuer           GeneralName,
    serialNumber     INTEGER }

id-regCtrl-protocolEncrKey    OBJECT IDENTIFIER ::= { id-regCtrl 6 }
--with syntax:
ProtocolEncrKey ::= SubjectPublicKeyInfo

-- Registration Info in CRMF
id-regInfo OBJECT IDENTIFIER ::= { id-pkip 2 }

id-regInfo-utf8Pairs    OBJECT IDENTIFIER ::= { id-regInfo 1 }
--with syntax
UTF8Pairs ::= UTF8String

id-regInfo-certReq       OBJECT IDENTIFIER ::= { id-regInfo 2 }



Myers, et. al.              Standards Track                    [Page 23]


RFC 2511                  Internet X.509 CRMF                 March 1999


--with syntax
CertReq ::= CertRequest

END















































Myers, et. al.              Standards Track                    [Page 24]


RFC 2511                  Internet X.509 CRMF                 March 1999


Full Copyright Statement

   Copyright (C) The Internet Society (1999).  All Rights Reserved.

   This document and translations of it may be copied and furnished to
   others, and derivative works that comment on or otherwise explain it
   or assist in its implementation may be prepared, copied, published
   and distributed, in whole or in part, without restriction of any
   kind, provided that the above copyright notice and this paragraph are
   included on all such copies and derivative works.  However, this
   document itself may not be modified in any way, such as by removing
   the copyright notice or references to the Internet Society or other
   Internet organizations, except as needed for the purpose of
   developing Internet standards in which case the procedures for
   copyrights defined in the Internet Standards process must be
   followed, or as required to translate it into languages other than
   English.

   The limited permissions granted above are perpetual and will not be
   revoked by the Internet Society or its successors or assigns.

   This document and the information contained herein is provided on an
   "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
   TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
   BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
   HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
























Myers, et. al.              Standards Track                    [Page 25]


Html markup produced by rfcmarkup 1.129b, available from https://tools.ietf.org/tools/rfcmarkup/