RFC 6021 Common YANG Data Types

[Docs] [txt|pdf] [draft-ietf-netm...] [Tracker] [Diff1] [Diff2]

Obsoleted by: 6991 PROPOSED STANDARD

Internet Engineering Task Force (IETF)             J. Schoenwaelder, Ed.
Request for Comments: 6021                             Jacobs University
Category: Standards Track                                   October 2010
ISSN: 2070-1721


                         Common YANG Data Types

Abstract

   This document introduces a collection of common data types to be used
   with the YANG data modeling language.

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 5741.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   http://www.rfc-editor.org/info/rfc6021.

Copyright Notice

   Copyright (c) 2010 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.










Schoenwaelder                Standards Track                    [Page 1]


RFC 6021                       YANG-TYPES                   October 2010


   This document may contain material from IETF Documents or IETF
   Contributions published or made publicly available before November
   10, 2008.  The person(s) controlling the copyright in some of this
   material may not have granted the IETF Trust the right to allow
   modifications of such material outside the IETF Standards Process.
   Without obtaining an adequate license from the person(s) controlling
   the copyright in such materials, this document may not be modified
   outside the IETF Standards Process, and derivative works of it may
   not be created outside the IETF Standards Process, except to format
   it for publication as an RFC or to translate it into languages other
   than English.

Table of Contents

   1. Introduction ....................................................2
   2. Overview ........................................................3
   3. Core YANG Derived Types .........................................4
   4. Internet-Specific Derived Types ................................13
   5. IANA Considerations ............................................22
   6. Security Considerations ........................................23
   7. Contributors ...................................................23
   8. Acknowledgments ................................................23
   9. References .....................................................23
      9.1. Normative References ......................................23
      9.2. Informative References ....................................24

1.  Introduction

   YANG [RFC6020] is a data modeling language used to model
   configuration and state data manipulated by the Network Configuration
   Protocol (NETCONF) [RFC4741].  The YANG language supports a small set
   of built-in data types and provides mechanisms to derive other types
   from the built-in types.

   This document introduces a collection of common data types derived
   from the built-in YANG data types.  The definitions are organized in
   several YANG modules.  The "ietf-yang-types" module contains
   generally useful data types.  The "ietf-inet-types" module contains
   definitions that are relevant for the Internet protocol suite.

   The derived types are generally designed to be applicable for
   modeling all areas of management information.

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in BCP
   14 [RFC2119].




Schoenwaelder                Standards Track                    [Page 2]


RFC 6021                       YANG-TYPES                   October 2010


2.  Overview

   This section provides a short overview of the types defined in
   subsequent sections and their equivalent Structure of Management
   Information Version 2 (SMIv2) [RFC2578][RFC2579] data types.  A YANG
   data type is equivalent to an SMIv2 data type if the data types have
   the same set of values and the semantics of the values are
   equivalent.

   Table 1 lists the types defined in the ietf-yang-types YANG module
   and the corresponding SMIv2 types (- indicates there is no
   corresponding SMIv2 type).

                              ietf-yang-types

        +-----------------------+--------------------------------+
        | YANG type             | Equivalent SMIv2 type (module) |
        +-----------------------+--------------------------------+
        | counter32             | Counter32 (SNMPv2-SMI)         |
        | zero-based-counter32  | ZeroBasedCounter32 (RMON2-MIB) |
        | counter64             | Counter64 (SNMPv2-SMI)         |
        | zero-based-counter64  | ZeroBasedCounter64 (HCNUM-TC)  |
        | gauge32               | Gauge32 (SNMPv2-SMI)           |
        | gauge64               | CounterBasedGauge64 (HCNUM-TC) |
        | object-identifier     | -                              |
        | object-identifier-128 | OBJECT IDENTIFIER              |
        | date-and-time         | -                              |
        | timeticks             | TimeTicks (SNMPv2-SMI)         |
        | timestamp             | TimeStamp (SNMPv2-TC)          |
        | phys-address          | PhysAddress (SNMPv2-TC)        |
        | mac-address           | MacAddress (SNMPv2-TC)         |
        | xpath1.0              | -                              |
        +-----------------------+--------------------------------+

                                  Table 1
















Schoenwaelder                Standards Track                    [Page 3]


RFC 6021                       YANG-TYPES                   October 2010


   Table 2 lists the types defined in the ietf-inet-types YANG module
   and the corresponding SMIv2 types (if any).

                              ietf-inet-types

    +-----------------+-----------------------------------------------+
    | YANG type       | Equivalent SMIv2 type (module)                |
    +-----------------+-----------------------------------------------+
    | ip-version      | InetVersion (INET-ADDRESS-MIB)                |
    | dscp            | Dscp (DIFFSERV-DSCP-TC)                       |
    | ipv6-flow-label | IPv6FlowLabel (IPV6-FLOW-LABEL-MIB)           |
    | port-number     | InetPortNumber (INET-ADDRESS-MIB)             |
    | as-number       | InetAutonomousSystemNumber (INET-ADDRESS-MIB) |
    | ip-address      | -                                             |
    | ipv4-address    | -                                             |
    | ipv6-address    | -                                             |
    | ip-prefix       | -                                             |
    | ipv4-prefix     | -                                             |
    | ipv6-prefix     | -                                             |
    | domain-name     | -                                             |
    | host            | -                                             |
    | uri             | Uri (URI-TC-MIB)                              |
    +-----------------+-----------------------------------------------+

                                  Table 2

3.  Core YANG Derived Types

   The ietf-yang-types YANG module references [IEEE802], [ISO9834-1],
   [RFC2578], [RFC2579], [RFC2856], [RFC3339], [RFC4502], [XPATH], and
   [XSD-TYPES].

   <CODE BEGINS> file "ietf-yang-types@2010-09-24.yang"

 module ietf-yang-types {

   namespace "urn:ietf:params:xml:ns:yang:ietf-yang-types";
   prefix "yang";

   organization
    "IETF NETMOD (NETCONF Data Modeling Language) Working Group";

   contact
    "WG Web:   <http://tools.ietf.org/wg/netmod/>
     WG List:  <mailto:netmod@ietf.org>

     WG Chair: David Partain
               <mailto:david.partain@ericsson.com>



Schoenwaelder                Standards Track                    [Page 4]


RFC 6021                       YANG-TYPES                   October 2010


     WG Chair: David Kessens
               <mailto:david.kessens@nsn.com>

     Editor:   Juergen Schoenwaelder
               <mailto:j.schoenwaelder@jacobs-university.de>";

   description
    "This module contains a collection of generally useful derived
     YANG data types.

     Copyright (c) 2010 IETF Trust and the persons identified as
     authors of the code.  All rights reserved.

     Redistribution and use in source and binary forms, with or without
     modification, is permitted pursuant to, and subject to the license
     terms contained in, the Simplified BSD License set forth in Section
     4.c of the IETF Trust's Legal Provisions Relating to IETF Documents
     (http://trustee.ietf.org/license-info).

     This version of this YANG module is part of RFC 6021; see
     the RFC itself for full legal notices.";

   revision 2010-09-24 {
     description
      "Initial revision.";
     reference
      "RFC 6021: Common YANG Data Types";
   }

   /*** collection of counter and gauge types ***/

   typedef counter32 {
     type uint32;
     description
      "The counter32 type represents a non-negative integer
       that monotonically increases until it reaches a
       maximum value of 2^32-1 (4294967295 decimal), when it
       wraps around and starts increasing again from zero.

       Counters have no defined 'initial' value, and thus, a
       single value of a counter has (in general) no information
       content.  Discontinuities in the monotonically increasing
       value normally occur at re-initialization of the
       management system, and at other times as specified in the
       description of a schema node using this type.  If such
       other times can occur, for example, the creation of
       a schema node of type counter32 at times other than
       re-initialization, then a corresponding schema node



Schoenwaelder                Standards Track                    [Page 5]


RFC 6021                       YANG-TYPES                   October 2010


       should be defined, with an appropriate type, to indicate
       the last discontinuity.

       The counter32 type should not be used for configuration
       schema nodes.  A default statement SHOULD NOT be used in
       combination with the type counter32.

       In the value set and its semantics, this type is equivalent
       to the Counter32 type of the SMIv2.";
     reference
      "RFC 2578: Structure of Management Information Version 2 (SMIv2)";
   }

   typedef zero-based-counter32 {
     type yang:counter32;
     default "0";
     description
      "The zero-based-counter32 type represents a counter32
       that has the defined 'initial' value zero.

       A schema node of this type will be set to zero (0) on creation
       and will thereafter increase monotonically until it reaches
       a maximum value of 2^32-1 (4294967295 decimal), when it
       wraps around and starts increasing again from zero.

       Provided that an application discovers a new schema node
       of this type within the minimum time to wrap, it can use the
       'initial' value as a delta.  It is important for a management
       station to be aware of this minimum time and the actual time
       between polls, and to discard data if the actual time is too
       long or there is no defined minimum time.

       In the value set and its semantics, this type is equivalent
       to the ZeroBasedCounter32 textual convention of the SMIv2.";
     reference
       "RFC 4502: Remote Network Monitoring Management Information
                  Base Version 2";
   }

   typedef counter64 {
     type uint64;
     description
      "The counter64 type represents a non-negative integer
       that monotonically increases until it reaches a
       maximum value of 2^64-1 (18446744073709551615 decimal),
       when it wraps around and starts increasing again from zero.

       Counters have no defined 'initial' value, and thus, a



Schoenwaelder                Standards Track                    [Page 6]


RFC 6021                       YANG-TYPES                   October 2010


       single value of a counter has (in general) no information
       content.  Discontinuities in the monotonically increasing
       value normally occur at re-initialization of the
       management system, and at other times as specified in the
       description of a schema node using this type.  If such
       other times can occur, for example, the creation of
       a schema node of type counter64 at times other than
       re-initialization, then a corresponding schema node
       should be defined, with an appropriate type, to indicate
       the last discontinuity.

       The counter64 type should not be used for configuration
       schema nodes.  A default statement SHOULD NOT be used in
       combination with the type counter64.

       In the value set and its semantics, this type is equivalent
       to the Counter64 type of the SMIv2.";
     reference
      "RFC 2578: Structure of Management Information Version 2 (SMIv2)";
   }

   typedef zero-based-counter64 {
     type yang:counter64;
     default "0";
     description
      "The zero-based-counter64 type represents a counter64 that
       has the defined 'initial' value zero.

       A schema node of this type will be set to zero (0) on creation
       and will thereafter increase monotonically until it reaches
       a maximum value of 2^64-1 (18446744073709551615 decimal),
       when it wraps around and starts increasing again from zero.

       Provided that an application discovers a new schema node
       of this type within the minimum time to wrap, it can use the
       'initial' value as a delta.  It is important for a management
       station to be aware of this minimum time and the actual time
       between polls, and to discard data if the actual time is too
       long or there is no defined minimum time.

       In the value set and its semantics, this type is equivalent
       to the ZeroBasedCounter64 textual convention of the SMIv2.";
     reference
      "RFC 2856: Textual Conventions for Additional High Capacity
                 Data Types";
   }

   typedef gauge32 {



Schoenwaelder                Standards Track                    [Page 7]


RFC 6021                       YANG-TYPES                   October 2010


     type uint32;
     description
      "The gauge32 type represents a non-negative integer, which
       may increase or decrease, but shall never exceed a maximum
       value, nor fall below a minimum value.  The maximum value
       cannot be greater than 2^32-1 (4294967295 decimal), and
       the minimum value cannot be smaller than 0.  The value of
       a gauge32 has its maximum value whenever the information
       being modeled is greater than or equal to its maximum
       value, and has its minimum value whenever the information
       being modeled is smaller than or equal to its minimum value.
       If the information being modeled subsequently decreases
       below (increases above) the maximum (minimum) value, the
       gauge32 also decreases (increases).

       In the value set and its semantics, this type is equivalent
       to the Gauge32 type of the SMIv2.";
     reference
      "RFC 2578: Structure of Management Information Version 2 (SMIv2)";
   }

   typedef gauge64 {
     type uint64;
     description
      "The gauge64 type represents a non-negative integer, which
       may increase or decrease, but shall never exceed a maximum
       value, nor fall below a minimum value.  The maximum value
       cannot be greater than 2^64-1 (18446744073709551615), and
       the minimum value cannot be smaller than 0.  The value of
       a gauge64 has its maximum value whenever the information
       being modeled is greater than or equal to its maximum
       value, and has its minimum value whenever the information
       being modeled is smaller than or equal to its minimum value.
       If the information being modeled subsequently decreases
       below (increases above) the maximum (minimum) value, the
       gauge64 also decreases (increases).

       In the value set and its semantics, this type is equivalent
       to the CounterBasedGauge64 SMIv2 textual convention defined
       in RFC 2856";
     reference
      "RFC 2856: Textual Conventions for Additional High Capacity
                 Data Types";
   }







Schoenwaelder                Standards Track                    [Page 8]


RFC 6021                       YANG-TYPES                   October 2010


   /*** collection of identifier related types ***/

   typedef object-identifier {
     type string {
       pattern '(([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))'
             + '(\.(0|([1-9]\d*)))*';
     }
     description
      "The object-identifier type represents administratively
       assigned names in a registration-hierarchical-name tree.

       Values of this type are denoted as a sequence of numerical
       non-negative sub-identifier values.  Each sub-identifier
       value MUST NOT exceed 2^32-1 (4294967295).  Sub-identifiers
       are separated by single dots and without any intermediate
       whitespace.

       The ASN.1 standard restricts the value space of the first
       sub-identifier to 0, 1, or 2.  Furthermore, the value space
       of the second sub-identifier is restricted to the range
       0 to 39 if the first sub-identifier is 0 or 1.  Finally,
       the ASN.1 standard requires that an object identifier
       has always at least two sub-identifier.  The pattern
       captures these restrictions.

       Although the number of sub-identifiers is not limited,
       module designers should realize that there may be
       implementations that stick with the SMIv2 limit of 128
       sub-identifiers.

       This type is a superset of the SMIv2 OBJECT IDENTIFIER type
       since it is not restricted to 128 sub-identifiers.  Hence,
       this type SHOULD NOT be used to represent the SMIv2 OBJECT
       IDENTIFIER type, the object-identifier-128 type SHOULD be
       used instead.";
     reference
      "ISO9834-1: Information technology -- Open Systems
       Interconnection -- Procedures for the operation of OSI
       Registration Authorities: General procedures and top
       arcs of the ASN.1 Object Identifier tree";
   }










Schoenwaelder                Standards Track                    [Page 9]


RFC 6021                       YANG-TYPES                   October 2010


   typedef object-identifier-128 {
     type object-identifier {
       pattern '\d*(\.\d*){1,127}';
     }
     description
      "This type represents object-identifiers restricted to 128
       sub-identifiers.

       In the value set and its semantics, this type is equivalent
       to the OBJECT IDENTIFIER type of the SMIv2.";
     reference
      "RFC 2578: Structure of Management Information Version 2 (SMIv2)";
   }

   /*** collection of date and time related types ***/

   typedef date-and-time {
     type string {
       pattern '\d{4}-\d{2}-\d{2}T\d{2}:\d{2}:\d{2}(\.\d+)?'
             + '(Z|[\+\-]\d{2}:\d{2})';
     }
     description
      "The date-and-time type is a profile of the ISO 8601
       standard for representation of dates and times using the
       Gregorian calendar.  The profile is defined by the
       date-time production in Section 5.6 of RFC 3339.

       The date-and-time type is compatible with the dateTime XML
       schema type with the following notable exceptions:

       (a) The date-and-time type does not allow negative years.

       (b) The date-and-time time-offset -00:00 indicates an unknown
           time zone (see RFC 3339) while -00:00 and +00:00 and Z all
           represent the same time zone in dateTime.

       (c) The canonical format (see below) of data-and-time values
           differs from the canonical format used by the dateTime XML
           schema type, which requires all times to be in UTC using the
           time-offset 'Z'.

       This type is not equivalent to the DateAndTime textual
       convention of the SMIv2 since RFC 3339 uses a different
       separator between full-date and full-time and provides
       higher resolution of time-secfrac.






Schoenwaelder                Standards Track                   [Page 10]


RFC 6021                       YANG-TYPES                   October 2010


       The canonical format for date-and-time values with a known time
       zone uses a numeric time zone offset that is calculated using
       the device's configured known offset to UTC time.  A change of
       the device's offset to UTC time will cause date-and-time values
       to change accordingly.  Such changes might happen periodically
       in case a server follows automatically daylight saving time
       (DST) time zone offset changes.  The canonical format for
       date-and-time values with an unknown time zone (usually referring
       to the notion of local time) uses the time-offset -00:00.";
     reference
      "RFC 3339: Date and Time on the Internet: Timestamps
       RFC 2579: Textual Conventions for SMIv2
       XSD-TYPES: XML Schema Part 2: Datatypes Second Edition";
   }

   typedef timeticks {
     type uint32;
     description
      "The timeticks type represents a non-negative integer that
       represents the time, modulo 2^32 (4294967296 decimal), in
       hundredths of a second between two epochs.  When a schema
       node is defined that uses this type, the description of
       the schema node identifies both of the reference epochs.

       In the value set and its semantics, this type is equivalent
       to the TimeTicks type of the SMIv2.";
     reference
      "RFC 2578: Structure of Management Information Version 2 (SMIv2)";
   }

   typedef timestamp {
     type yang:timeticks;
     description
      "The timestamp type represents the value of an associated
       timeticks schema node at which a specific occurrence happened.
       The specific occurrence must be defined in the description
       of any schema node defined using this type.  When the specific
       occurrence occurred prior to the last time the associated
       timeticks attribute was zero, then the timestamp value is
       zero.  Note that this requires all timestamp values to be
       reset to zero when the value of the associated timeticks
       attribute reaches 497+ days and wraps around to zero.

       The associated timeticks schema node must be specified
       in the description of any schema node using this type.

       In the value set and its semantics, this type is equivalent
       to the TimeStamp textual convention of the SMIv2.";



Schoenwaelder                Standards Track                   [Page 11]


RFC 6021                       YANG-TYPES                   October 2010


     reference
      "RFC 2579: Textual Conventions for SMIv2";
   }

   /*** collection of generic address types ***/

   typedef phys-address {
     type string {
       pattern '([0-9a-fA-F]{2}(:[0-9a-fA-F]{2})*)?';
     }
     description
      "Represents media- or physical-level addresses represented
       as a sequence octets, each octet represented by two hexadecimal
       numbers.  Octets are separated by colons.  The canonical
       representation uses lowercase characters.

       In the value set and its semantics, this type is equivalent
       to the PhysAddress textual convention of the SMIv2.";
     reference
      "RFC 2579: Textual Conventions for SMIv2";
   }

   typedef mac-address {
     type string {
       pattern '[0-9a-fA-F]{2}(:[0-9a-fA-F]{2}){5}';
     }
     description
      "The mac-address type represents an IEEE 802 MAC address.
       The canonical representation uses lowercase characters.

       In the value set and its semantics, this type is equivalent
       to the MacAddress textual convention of the SMIv2.";
     reference
      "IEEE 802: IEEE Standard for Local and Metropolitan Area
                 Networks: Overview and Architecture
       RFC 2579: Textual Conventions for SMIv2";
   }

   /*** collection of XML specific types ***/

   typedef xpath1.0 {
     type string;
     description
      "This type represents an XPATH 1.0 expression.

       When a schema node is defined that uses this type, the
       description of the schema node MUST specify the XPath
       context in which the XPath expression is evaluated.";



Schoenwaelder                Standards Track                   [Page 12]


RFC 6021                       YANG-TYPES                   October 2010


     reference
      "XPATH: XML Path Language (XPath) Version 1.0";
   }

 }

   <CODE ENDS>

4.  Internet-Specific Derived Types

   The ietf-inet-types YANG module references [RFC0768], [RFC0791],
   [RFC0793], [RFC0952], [RFC1034], [RFC1123], [RFC1930], [RFC2460],
   [RFC2474], [RFC2780], [RFC2782], [RFC3289], [RFC3305], [RFC3492],
   [RFC3595], [RFC3986], [RFC4001], [RFC4007], [RFC4271], [RFC4291],
   [RFC4340], [RFC4893], [RFC4960], [RFC5017], [RFC5891], and [RFC5952].

   <CODE BEGINS> file "ietf-inet-types@2010-09-24.yang"

 module ietf-inet-types {

   namespace "urn:ietf:params:xml:ns:yang:ietf-inet-types";
   prefix "inet";

   organization
    "IETF NETMOD (NETCONF Data Modeling Language) Working Group";

   contact
    "WG Web:   <http://tools.ietf.org/wg/netmod/>
     WG List:  <mailto:netmod@ietf.org>

     WG Chair: David Partain
               <mailto:david.partain@ericsson.com>

     WG Chair: David Kessens
               <mailto:david.kessens@nsn.com>

     Editor:   Juergen Schoenwaelder
               <mailto:j.schoenwaelder@jacobs-university.de>";

   description
    "This module contains a collection of generally useful derived
     YANG data types for Internet addresses and related things.

     Copyright (c) 2010 IETF Trust and the persons identified as
     authors of the code.  All rights reserved.






Schoenwaelder                Standards Track                   [Page 13]


RFC 6021                       YANG-TYPES                   October 2010


     Redistribution and use in source and binary forms, with or without
     modification, is permitted pursuant to, and subject to the license
     terms contained in, the Simplified BSD License set forth in Section
     4.c of the IETF Trust's Legal Provisions Relating to IETF Documents
     (http://trustee.ietf.org/license-info).

     This version of this YANG module is part of RFC 6021; see
     the RFC itself for full legal notices.";

   revision 2010-09-24 {
     description
      "Initial revision.";
     reference
      "RFC 6021: Common YANG Data Types";
   }

   /*** collection of protocol field related types ***/

   typedef ip-version {
     type enumeration {
       enum unknown {
         value "0";
         description
          "An unknown or unspecified version of the Internet protocol.";
       }
       enum ipv4 {
         value "1";
         description
          "The IPv4 protocol as defined in RFC 791.";
       }
       enum ipv6 {
         value "2";
         description
          "The IPv6 protocol as defined in RFC 2460.";
       }
     }
     description
      "This value represents the version of the IP protocol.

       In the value set and its semantics, this type is equivalent
       to the InetVersion textual convention of the SMIv2.";
     reference
      "RFC  791: Internet Protocol
       RFC 2460: Internet Protocol, Version 6 (IPv6) Specification
       RFC 4001: Textual Conventions for Internet Network Addresses";
   }

   typedef dscp {



Schoenwaelder                Standards Track                   [Page 14]


RFC 6021                       YANG-TYPES                   October 2010


     type uint8 {
       range "0..63";
     }
     description
      "The dscp type represents a Differentiated Services Code-Point
       that may be used for marking packets in a traffic stream.

       In the value set and its semantics, this type is equivalent
       to the Dscp textual convention of the SMIv2.";
     reference
      "RFC 3289: Management Information Base for the Differentiated
                 Services Architecture
       RFC 2474: Definition of the Differentiated Services Field
                 (DS Field) in the IPv4 and IPv6 Headers
       RFC 2780: IANA Allocation Guidelines For Values In
                 the Internet Protocol and Related Headers";
   }

   typedef ipv6-flow-label {
     type uint32 {
       range "0..1048575";
     }
     description
      "The flow-label type represents flow identifier or Flow Label
       in an IPv6 packet header that may be used to discriminate
       traffic flows.

       In the value set and its semantics, this type is equivalent
       to the IPv6FlowLabel textual convention of the SMIv2.";
     reference
      "RFC 3595: Textual Conventions for IPv6 Flow Label
       RFC 2460: Internet Protocol, Version 6 (IPv6) Specification";
   }

   typedef port-number {
     type uint16 {
       range "0..65535";
     }
     description
      "The port-number type represents a 16-bit port number of an
       Internet transport layer protocol such as UDP, TCP, DCCP, or
       SCTP.  Port numbers are assigned by IANA.  A current list of
       all assignments is available from <http://www.iana.org/>.

       Note that the port number value zero is reserved by IANA.  In
       situations where the value zero does not make sense, it can
       be excluded by subtyping the port-number type.




Schoenwaelder                Standards Track                   [Page 15]


RFC 6021                       YANG-TYPES                   October 2010


       In the value set and its semantics, this type is equivalent
       to the InetPortNumber textual convention of the SMIv2.";
     reference
      "RFC  768: User Datagram Protocol
       RFC  793: Transmission Control Protocol
       RFC 4960: Stream Control Transmission Protocol
       RFC 4340: Datagram Congestion Control Protocol (DCCP)
       RFC 4001: Textual Conventions for Internet Network Addresses";
   }

   /*** collection of autonomous system related types ***/

   typedef as-number {
     type uint32;
     description
      "The as-number type represents autonomous system numbers
       which identify an Autonomous System (AS).  An AS is a set
       of routers under a single technical administration, using
       an interior gateway protocol and common metrics to route
       packets within the AS, and using an exterior gateway
       protocol to route packets to other ASs'.  IANA maintains
       the AS number space and has delegated large parts to the
       regional registries.

       Autonomous system numbers were originally limited to 16
       bits.  BGP extensions have enlarged the autonomous system
       number space to 32 bits.  This type therefore uses an uint32
       base type without a range restriction in order to support
       a larger autonomous system number space.

       In the value set and its semantics, this type is equivalent
       to the InetAutonomousSystemNumber textual convention of
       the SMIv2.";
     reference
      "RFC 1930: Guidelines for creation, selection, and registration
                 of an Autonomous System (AS)
       RFC 4271: A Border Gateway Protocol 4 (BGP-4)
       RFC 4893: BGP Support for Four-octet AS Number Space
       RFC 4001: Textual Conventions for Internet Network Addresses";
   }

   /*** collection of IP address and hostname related types ***/

   typedef ip-address {
     type union {
       type inet:ipv4-address;
       type inet:ipv6-address;
     }



Schoenwaelder                Standards Track                   [Page 16]


RFC 6021                       YANG-TYPES                   October 2010


     description
      "The ip-address type represents an IP address and is IP
       version neutral.  The format of the textual representations
       implies the IP version.";
   }

   typedef ipv4-address {
     type string {
       pattern
         '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}'
       +  '([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])'
       + '(%[\p{N}\p{L}]+)?';
     }
     description
       "The ipv4-address type represents an IPv4 address in
        dotted-quad notation.  The IPv4 address may include a zone
        index, separated by a % sign.

        The zone index is used to disambiguate identical address
        values.  For link-local addresses, the zone index will
        typically be the interface index number or the name of an
        interface.  If the zone index is not present, the default
        zone of the device will be used.

        The canonical format for the zone index is the numerical
        format";
   }

   typedef ipv6-address {
     type string {
       pattern '((:|[0-9a-fA-F]{0,4}):)([0-9a-fA-F]{0,4}:){0,5}'
             + '((([0-9a-fA-F]{0,4}:)?(:|[0-9a-fA-F]{0,4}))|'
             + '(((25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])\.){3}'
             + '(25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])))'
             + '(%[\p{N}\p{L}]+)?';
       pattern '(([^:]+:){6}(([^:]+:[^:]+)|(.*\..*)))|'
             + '((([^:]+:)*[^:]+)?::(([^:]+:)*[^:]+)?)'
             + '(%.+)?';
     }
     description
      "The ipv6-address type represents an IPv6 address in full,
       mixed, shortened, and shortened-mixed notation.  The IPv6
       address may include a zone index, separated by a % sign.








Schoenwaelder                Standards Track                   [Page 17]


RFC 6021                       YANG-TYPES                   October 2010


       The zone index is used to disambiguate identical address
       values.  For link-local addresses, the zone index will
       typically be the interface index number or the name of an
       interface.  If the zone index is not present, the default
       zone of the device will be used.

       The canonical format of IPv6 addresses uses the compressed
       format described in RFC 4291, Section 2.2, item 2 with the
       following additional rules: the :: substitution must be
       applied to the longest sequence of all-zero 16-bit chunks
       in an IPv6 address.  If there is a tie, the first sequence
       of all-zero 16-bit chunks is replaced by ::.  Single
       all-zero 16-bit chunks are not compressed.  The canonical
       format uses lowercase characters and leading zeros are
       not allowed.  The canonical format for the zone index is
       the numerical format as described in RFC 4007, Section 
       11.2.";
     reference
      "RFC 4291: IP Version 6 Addressing Architecture
       RFC 4007: IPv6 Scoped Address Architecture
       RFC 5952: A Recommendation for IPv6 Address Text Representation";
   }

   typedef ip-prefix {
     type union {
       type inet:ipv4-prefix;
       type inet:ipv6-prefix;
     }
     description
      "The ip-prefix type represents an IP prefix and is IP
       version neutral.  The format of the textual representations
       implies the IP version.";
   }

   typedef ipv4-prefix {
     type string {
       pattern
          '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}'
        +  '([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])'
        + '/(([0-9])|([1-2][0-9])|(3[0-2]))';
     }
     description
      "The ipv4-prefix type represents an IPv4 address prefix.
       The prefix length is given by the number following the
       slash character and must be less than or equal to 32.






Schoenwaelder                Standards Track                   [Page 18]


RFC 6021                       YANG-TYPES                   October 2010


       A prefix length value of n corresponds to an IP address
       mask that has n contiguous 1-bits from the most
       significant bit (MSB) and all other bits set to 0.

       The canonical format of an IPv4 prefix has all bits of
       the IPv4 address set to zero that are not part of the
       IPv4 prefix.";
   }

   typedef ipv6-prefix {
     type string {
       pattern '((:|[0-9a-fA-F]{0,4}):)([0-9a-fA-F]{0,4}:){0,5}'
             + '((([0-9a-fA-F]{0,4}:)?(:|[0-9a-fA-F]{0,4}))|'
             + '(((25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])\.){3}'
             + '(25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])))'
             + '(/(([0-9])|([0-9]{2})|(1[0-1][0-9])|(12[0-8])))';
       pattern '(([^:]+:){6}(([^:]+:[^:]+)|(.*\..*)))|'
             + '((([^:]+:)*[^:]+)?::(([^:]+:)*[^:]+)?)'
             + '(/.+)';
     }
     description
      "The ipv6-prefix type represents an IPv6 address prefix.
       The prefix length is given by the number following the
       slash character and must be less than or equal 128.

       A prefix length value of n corresponds to an IP address
       mask that has n contiguous 1-bits from the most
       significant bit (MSB) and all other bits set to 0.

       The IPv6 address should have all bits that do not belong
       to the prefix set to zero.

       The canonical format of an IPv6 prefix has all bits of
       the IPv6 address set to zero that are not part of the
       IPv6 prefix.  Furthermore, IPv6 address is represented
       in the compressed format described in RFC 4291, Section 
       2.2, item 2 with the following additional rules: the ::
       substitution must be applied to the longest sequence of
       all-zero 16-bit chunks in an IPv6 address.  If there is
       a tie, the first sequence of all-zero 16-bit chunks is
       replaced by ::.  Single all-zero 16-bit chunks are not
       compressed.  The canonical format uses lowercase
       characters and leading zeros are not allowed.";
     reference
      "RFC 4291: IP Version 6 Addressing Architecture";
   }





Schoenwaelder                Standards Track                   [Page 19]


RFC 6021                       YANG-TYPES                   October 2010


   /*** collection of domain name and URI types ***/

   typedef domain-name {
     type string {
       pattern '((([a-zA-Z0-9_]([a-zA-Z0-9\-_]){0,61})?[a-zA-Z0-9]\.)*'
            +  '([a-zA-Z0-9_]([a-zA-Z0-9\-_]){0,61})?[a-zA-Z0-9]\.?)'
            +  '|\.';
       length "1..253";
     }
     description
      "The domain-name type represents a DNS domain name.  The
       name SHOULD be fully qualified whenever possible.

       Internet domain names are only loosely specified.  Section
       3.5 of RFC 1034 recommends a syntax (modified in Section
       2.1 of RFC 1123).  The pattern above is intended to allow
       for current practice in domain name use, and some possible
       future expansion.  It is designed to hold various types of
       domain names, including names used for A or AAAA records
       (host names) and other records, such as SRV records.  Note
       that Internet host names have a stricter syntax (described
       in RFC 952) than the DNS recommendations in RFCs 1034 and
       1123, and that systems that want to store host names in
       schema nodes using the domain-name type are recommended to
       adhere to this stricter standard to ensure interoperability.

       The encoding of DNS names in the DNS protocol is limited
       to 255 characters.  Since the encoding consists of labels
       prefixed by a length bytes and there is a trailing NULL
       byte, only 253 characters can appear in the textual dotted
       notation.

       The description clause of schema nodes using the domain-name
       type MUST describe when and how these names are resolved to
       IP addresses.  Note that the resolution of a domain-name value
       may require to query multiple DNS records (e.g., A for IPv4
       and AAAA for IPv6).  The order of the resolution process and
       which DNS record takes precedence can either be defined
       explicitely or it may depend on the configuration of the
       resolver.

       Domain-name values use the US-ASCII encoding.  Their canonical
       format uses lowercase US-ASCII characters.  Internationalized
       domain names MUST be encoded in punycode as described in RFC
       3492";
     reference
      "RFC  952: DoD Internet Host Table Specification
       RFC 1034: Domain Names - Concepts and Facilities



Schoenwaelder                Standards Track                   [Page 20]


RFC 6021                       YANG-TYPES                   October 2010


       RFC 1123: Requirements for Internet Hosts -- Application
                 and Support
       RFC 2782: A DNS RR for specifying the location of services
                 (DNS SRV)
       RFC 3492: Punycode: A Bootstring encoding of Unicode for
                 Internationalized Domain Names in Applications
                 (IDNA)
       RFC 5891: Internationalizing Domain Names in Applications
                 (IDNA): Protocol";
   }

   typedef host {
     type union {
       type inet:ip-address;
       type inet:domain-name;
     }
     description
      "The host type represents either an IP address or a DNS
       domain name.";
   }

   typedef uri {
     type string;
     description
      "The uri type represents a Uniform Resource Identifier
       (URI) as defined by STD 66.

       Objects using the uri type MUST be in US-ASCII encoding,
       and MUST be normalized as described by RFC 3986 Sections
       6.2.1, 6.2.2.1, and 6.2.2.2.  All unnecessary
       percent-encoding is removed, and all case-insensitive
       characters are set to lowercase except for hexadecimal
       digits, which are normalized to uppercase as described in
       Section 6.2.2.1.

       The purpose of this normalization is to help provide
       unique URIs.  Note that this normalization is not
       sufficient to provide uniqueness.  Two URIs that are
       textually distinct after this normalization may still be
       equivalent.

       Objects using the uri type may restrict the schemes that
       they permit.  For example, 'data:' and 'urn:' schemes
       might not be appropriate.

       A zero-length URI is not a valid URI.  This can be used to
       express 'URI absent' where required.




Schoenwaelder                Standards Track                   [Page 21]


RFC 6021                       YANG-TYPES                   October 2010


       In the value set and its semantics, this type is equivalent
       to the Uri SMIv2 textual convention defined in RFC 5017.";
     reference
      "RFC 3986: Uniform Resource Identifier (URI): Generic Syntax
       RFC 3305: Report from the Joint W3C/IETF URI Planning Interest
                 Group: Uniform Resource Identifiers (URIs), URLs,
                 and Uniform Resource Names (URNs): Clarifications
                 and Recommendations
       RFC 5017: MIB Textual Conventions for Uniform Resource
                 Identifiers (URIs)";
   }

 }

   <CODE ENDS>

5.  IANA Considerations

   This document registers two URIs in the IETF XML registry [RFC3688].
   Following the format in RFC 3688, the following registrations have
   been made.

     URI: urn:ietf:params:xml:ns:yang:ietf-yang-types

     Registrant Contact: The NETMOD WG of the IETF.

     XML: N/A, the requested URI is an XML namespace.


     URI: urn:ietf:params:xml:ns:yang:ietf-inet-types

     Registrant Contact: The NETMOD WG of the IETF.

     XML: N/A, the requested URI is an XML namespace.

   This document registers two YANG modules in the YANG Module Names
   registry [RFC6020].

     name:         ietf-yang-types
     namespace:    urn:ietf:params:xml:ns:yang:ietf-yang-types
     prefix:       yang
     reference:    RFC 6021

     name:         ietf-inet-types
     namespace:    urn:ietf:params:xml:ns:yang:ietf-inet-types
     prefix:       inet
     reference:    RFC 6021




Schoenwaelder                Standards Track                   [Page 22]


RFC 6021                       YANG-TYPES                   October 2010


6.  Security Considerations

   This document defines common data types using the YANG data modeling
   language.  The definitions themselves have no security impact on the
   Internet but the usage of these definitions in concrete YANG modules
   might have.  The security considerations spelled out in the YANG
   specification [RFC6020] apply for this document as well.

7.  Contributors

   The following people contributed significantly to the initial version
   of this document:

    - Andy Bierman (Brocade)
    - Martin Bjorklund (Tail-f Systems)
    - Balazs Lengyel (Ericsson)
    - David Partain (Ericsson)
    - Phil Shafer (Juniper Networks)

8.  Acknowledgments

   The editor wishes to thank the following individuals for providing
   helpful comments on various versions of this document: Ladislav
   Lhotka, Lars-Johan Liman, and Dan Romascanu.

9.  References

9.1.  Normative References

   [RFC2119]    Bradner, S., "Key words for use in RFCs to Indicate
                Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC3339]    Klyne, G., Ed. and C. Newman, "Date and Time on the
                Internet: Timestamps", RFC 3339, July 2002.

   [RFC3492]    Costello, A., "Punycode: A Bootstring encoding of
                Unicode for Internationalized Domain Names in
                Applications (IDNA)", RFC 3492, March 2003.

   [RFC3688]    Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
                January 2004.

   [RFC3986]    Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
                Resource Identifier (URI): Generic Syntax", STD 66,
                RFC 3986, January 2005.






Schoenwaelder                Standards Track                   [Page 23]


RFC 6021                       YANG-TYPES                   October 2010


   [RFC4007]    Deering, S., Haberman, B., Jinmei, T., Nordmark, E., and
                B. Zill, "IPv6 Scoped Address Architecture", RFC 4007,
                March 2005.

   [RFC4291]    Hinden, R. and S. Deering, "IP Version 6 Addressing
                Architecture", RFC 4291, February 2006.

   [RFC6020]    Bjorklund, M., Ed., "YANG - A Data Modeling Language for
                Network Configuration Protocol (NETCONF)", RFC 6020,
                October 2010.

   [XPATH]      Clark, J. and S. DeRose, "XML Path Language (XPath)
                Version 1.0", World Wide Web Consortium
                Recommendation REC-xpath-19991116, November 1999,
                <http://www.w3.org/TR/1999/REC-xpath-19991116>.

9.2.  Informative References

   [IEEE802]    IEEE, "IEEE Standard for Local and Metropolitan Area
                Networks: Overview and Architecture", IEEE Std. 802-
                2001.

   [ISO9834-1]  ISO/IEC, "Information technology -- Open Systems
                Interconnection -- Procedures for the operation of OSI
                Registration Authorities: General procedures and top
                arcs of the ASN.1 Object Identifier tree", ISO/
                IEC 9834-1:2008, 2008.

   [RFC0768]    Postel, J., "User Datagram Protocol", STD 6, RFC 768,
                August 1980.

   [RFC0791]    Postel, J., "Internet Protocol", STD 5, RFC 791,
                September 1981.

   [RFC0793]    Postel, J., "Transmission Control Protocol", STD 7,
                RFC 793, September 1981.

   [RFC0952]    Harrenstien, K., Stahl, M., and E. Feinler, "DoD
                Internet host table specification", RFC 952,
                October 1985.

   [RFC1034]    Mockapetris, P., "Domain names - concepts and
                facilities", STD 13, RFC 1034, November 1987.

   [RFC1123]    Braden, R., "Requirements for Internet Hosts -
                Application and Support", STD 3, RFC 1123, October 1989.





Schoenwaelder                Standards Track                   [Page 24]


RFC 6021                       YANG-TYPES                   October 2010


   [RFC1930]    Hawkinson, J. and T. Bates, "Guidelines for creation,
                selection, and registration of an Autonomous System
                (AS)", BCP 6, RFC 1930, March 1996.

   [RFC2460]    Deering, S. and R. Hinden, "Internet Protocol, Version 6
                (IPv6) Specification", RFC 2460, December 1998.

   [RFC2474]    Nichols, K., Blake, S., Baker, F., and D. Black,
                "Definition of the Differentiated Services Field (DS
                Field) in the IPv4 and IPv6 Headers", RFC 2474,
                December 1998.

   [RFC2578]    McCloghrie, K., Ed., Perkins, D., Ed., and J.
                Schoenwaelder, Ed., "Structure of Management Information
                Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.

   [RFC2579]    McCloghrie, K., Ed., Perkins, D., Ed., and J.
                Schoenwaelder, Ed., "Textual Conventions for SMIv2",
                STD 58, RFC 2579, April 1999.

   [RFC2780]    Bradner, S. and V. Paxson, "IANA Allocation Guidelines
                For Values In the Internet Protocol and Related
                Headers", BCP 37, RFC 2780, March 2000.

   [RFC2782]    Gulbrandsen, A., Vixie, P., and L. Esibov, "A DNS RR for
                specifying the location of services (DNS SRV)",
                RFC 2782, February 2000.

   [RFC2856]    Bierman, A., McCloghrie, K., and R. Presuhn, "Textual
                Conventions for Additional High Capacity Data Types",
                RFC 2856, June 2000.

   [RFC3289]    Baker, F., Chan, K., and A. Smith, "Management
                Information Base for the Differentiated Services
                Architecture", RFC 3289, May 2002.

   [RFC3305]    Mealling, M. and R. Denenberg, "Report from the Joint
                W3C/IETF URI Planning Interest Group: Uniform Resource
                Identifiers (URIs), URLs, and Uniform Resource Names
                (URNs): Clarifications and Recommendations", RFC 3305,
                August 2002.

   [RFC3595]    Wijnen, B., "Textual Conventions for IPv6 Flow Label",
                RFC 3595, September 2003.

   [RFC4001]    Daniele, M., Haberman, B., Routhier, S., and J.
                Schoenwaelder, "Textual Conventions for Internet Network
                Addresses", RFC 4001, February 2005.



Schoenwaelder                Standards Track                   [Page 25]


RFC 6021                       YANG-TYPES                   October 2010


   [RFC4271]    Rekhter, Y., Li, T., and S. Hares, "A Border Gateway
                Protocol 4 (BGP-4)", RFC 4271, January 2006.

   [RFC4340]    Kohler, E., Handley, M., and S. Floyd, "Datagram
                Congestion Control Protocol (DCCP)", RFC 4340,
                March 2006.

   [RFC4502]    Waldbusser, S., "Remote Network Monitoring Management
                Information Base Version 2", RFC 4502, May 2006.

   [RFC4741]    Enns, R., "NETCONF Configuration Protocol", RFC 4741,
                December 2006.

   [RFC4893]    Vohra, Q. and E. Chen, "BGP Support for Four-octet AS
                Number Space", RFC 4893, May 2007.

   [RFC4960]    Stewart, R., "Stream Control Transmission Protocol",
                RFC 4960, September 2007.

   [RFC5017]    McWalter, D., "MIB Textual Conventions for Uniform
                Resource Identifiers (URIs)", RFC 5017, September 2007.

   [RFC5891]    Klensin, J., "Internationalizing Domain Names in
                Applications (IDNA): Protocol", RFC 5891, August 2010.

   [RFC5952]    Kawamura, S. and M. Kawashima, "A Recommendation for
                IPv6 Address Text Representation", RFC 5952,
                August 2010.

   [XSD-TYPES]  Malhotra, A. and P. Biron, "XML Schema Part 2: Datatypes
                Second Edition", World Wide Web Consortium
                Recommendation REC-xmlschema-2-20041028, October 2004,
                <http://www.w3.org/TR/2004/REC-xmlschema-2-20041028>.

Author's Address

   Juergen Schoenwaelder (editor)
   Jacobs University

   EMail: j.schoenwaelder@jacobs-university.de











Schoenwaelder                Standards Track                   [Page 26]


Html markup produced by rfcmarkup 1.129b, available from https://tools.ietf.org/tools/rfcmarkup/