[Docs] [txt|pdf] [draft-rfced-exp...] [Tracker] [Diff1] [Diff2]
HISTORIC
Network Working Group K. McCloghrie, Editor
Request for Comments: 1909 Cisco Systems, Inc.
Category: Experimental February 1996
An Administrative Infrastructure for SNMPv2
Status of this Memo
This memo defines an Experimental Protocol for the Internet
community. This memo does not specify an Internet standard of any
kind. Discussion and suggestions for improvement are requested.
Distribution of this memo is unlimited.
Table of Contents
1. Introduction ................................................ 2
2. Overview .................................................... 2
2.1 Contexts ................................................... 3
2.2 Authorization: Access Rights and MIB Views ................. 3
2.3 Authentication and Privacy ................................. 4
2.4 Access Control ............................................. 5
2.5 Security Models ............................................ 5
2.6 Proxy ...................................................... 5
3. Elements of the Model ....................................... 7
3.1 SNMPv2 Entity .............................................. 7
3.2 SNMPv2 Agent ............................................... 7
3.3 SNMPv2 Manager ............................................. 8
3.4 SNMPv2 Dual-Role Entity .................................... 8
3.5 View Subtree and Families .................................. 9
3.6 MIB View ................................................... 9
3.7 SNMPv2 Context ............................................. 10
3.7.1 Local SNMPv2 Context ..................................... 11
3.7.2 Proxy SNMPv2 Context ..................................... 11
3.8 SNMPv2 PDUs and Operations ................................. 12
3.8.1 The Report-PDU ........................................... 12
3.9 SNMPv2 Access Control Policy ............................... 13
4. Security Considerations ..................................... 13
5. Editor's Address ............................................ 14
6. Acknowledgements ............................................ 14
7. References .................................................. 14
Appendix A Disambiguating the SNMPv2 Protocol Definition ....... 16
Appendix B Who Sends Inform-Requests? ......................... 17
Appendix B.1 Management Philosophy ............................. 17
Appendix B.2 The Danger of Trap Storms ......................... 17
Appendix B.3 Inform-Requests ................................... 18
McCloghrie Experimental [Page 1]
RFC 1909 An SNMPv2 Administrative Infrastructure February 1996
1. Introduction
A management system contains: several (potentially many) nodes, each
with a processing entity, termed an agent, which has access to
management instrumentation; at least one management station; and, a
management protocol, used to convey management information between
the agents and management stations. Operations of the protocol are
carried out under an administrative framework which defines
authentication, authorization, access control, and privacy policies.
Management stations execute management applications which monitor and
control managed elements. Managed elements are devices such as
hosts, routers, terminal servers, etc., which are monitored and
controlled via access to their management information.
It is the purpose of this document, An Administrative Infrastructure
for SNMPv2, to define an administrative framework which realizes
effective management in a variety of configurations and environments.
The SNMPv2 framework is fully described in [1-6]. This framework is
derived from the original Internet-standard Network Management
Framework (SNMPv1), which consists of these three documents:
STD 16, RFC 1155 [7] which defines the Structure of Management
Information (SMI), the mechanisms used for describing and naming
objects for the purpose of management.
STD 16, RFC 1212 [8] which defines a more concise description
mechanism, which is wholly consistent with the SMI.
STD 15, RFC 1157 [9] which defines the Simple Network Management
Protocol (SNMP), the protocol used for network access to managed
objects.
For information on coexistence between SNMPv1 and SNMPv2, consult
[10].
2. Overview
A management domain typically contains a large amount of management
information. Each individual item of management information is an
instance of a managed object type. The definition of a related set
of managed object types is contained in a Management Information Base
(MIB) module. Many such MIB modules are defined. For each managed
object type it describes, a MIB module defines not only the semantics
and syntax of that managed object type, but also the method of
identifying an individual instance so that multiple instances of the
same managed object type can be distinguished.
McCloghrie Experimental [Page 2]
RFC 1909 An SNMPv2 Administrative Infrastructure February 1996
2.1. Contexts
Typically, there are many instances of each managed object type
within a management domain. For simplicity, the method for
identifying instances specified by the MIB module does not allow each
instance to be distinguished amongst the set of all instances within
the management domain; rather, it allows each instance to be
identified only within some scope or "context", where there are
multiple such contexts within the management domain. Often, a
context is a physical device, or perhaps, a logical device, although
a context can also encompass multiple devices, or a subset of a
single device, or even a subset of multiple devices. Thus, in order
to identify an individual item of management information within the
management domain, its context must be identified in addition to its
object type and its instance.
For example, the managed object type, ifDescr [11], is defined as the
description of a network interface. To identify the description of
device-X's first network interface, three pieces of information are
needed, e.g., device-X (the context), ifDescr (the managed object
type), and "1" (the instance).
Note that each context has (at least) one globally-unique
identification within the management domain. Note also that the same
item of management information can exist in multiple contexts. So,
an item of management information can have multiple globally-unique
identifications, either because it exists in multiple contexts,
and/or because each such context has multiple globally-unique
identifications.
2.2. Authorization: Access Rights and MIB Views
For security reasons, it is often valuable to be able to restrict the
access rights of some management applications to only a subset of the
management information in the management domain. To provide this
capability, access to a context is via a "MIB view" which details a
specific set of managed object types (and optionally, the specific
instances of object types) within that context. For example, for a
given context, there will typically always be one MIB view which
provides access to all management information in that context, and
often there will be other MIB views each of which contains some
subset of the information. So, by providing access rights to a
management application in terms of the particular (subset) MIB view
it can access for that context, then the management application is
restricted in the desired manner.
Since managed object types (and their instances) are identified via
the tree-like naming structure of ISO's OBJECT IDENTIFIERs [12, 1],
McCloghrie Experimental [Page 3]
RFC 1909 An SNMPv2 Administrative Infrastructure February 1996
it is convenient to define a MIB view as the combination of a set of
"view subtrees", where each view subtree is a sub-tree within the
managed object naming tree. Thus, a simple MIB view (e.g., all
managed objects within the Internet Network Management Framework) can
be defined as a single view sub-tree, while more complicated MIB
views (e.g., all information relevant to a particular network
interface) can be represented by the union of multiple view sub-
trees.
While any set of managed objects can be described by the union of
some number of view subtrees, situations can arise that would require
a very large number of view subtrees. This could happen, for
example, when specifying all columns in one conceptual row of a MIB
table because they would appear in separate subtrees, one per column,
each with a very similar format. Because the formats are similar,
the required set of subtrees can easily be aggregated into one
structure. This structure is named a family of view subtrees after
the set of subtrees that it conceptually represents. A family of
view subtrees can either be included or excluded from a MIB view.
In addition to restricting access rights by identifying (sub-)sets of
management information, it is also valuable to restrict the requests
allowed on the management information within a particular context.
For example, one management application might be prohibited from
write-access to a particular context, while another might be allowed
to perform any type of operation.
2.3. Authentication and Privacy
The enforcement of access rights requires the means not only to
identify the entity on whose behalf a request is generated but also
to authenticate such identification. Another security capability
which is (optionally) provided is the ability to protect the data
within an SNMPv2 operation from disclosure (i.e., to encrypt the
data). This is particularly useful when sensitive data (e.g.,
passwords, or security keys) are accessed via SNMPv2 requests.
Recommendations for which algorithms are best for authentication and
privacy are subject to change. Such changes may occur as and when
new research results on the vulnerability of various algorithms are
published, and/or with the prevailing status of export control and
patent issues. Thus, it is valuable to allow these algorithms to be
specified as parameters, so that new algorithms can be accommodated
over time. In particular, one type of algorithm which may become
useful in the future is the set of algorithms associated with
asymmetric (public key) cryptography.
Note that not all accesses via SNMPv2 requests need to be secure.
McCloghrie Experimental [Page 4]
RFC 1909 An SNMPv2 Administrative Infrastructure February 1996
Indeed, there are purposes for which insecure access is required.
One example of this is the ability of a management application to
learn about devices of which it has no previous knowledge. Another
example is to perform any synchronization which the security
algorithms need before they can be used to communicate securely.
This need for insecure access is accommodated by defining one of the
algorithms for authentication as providing no authentication, and
similarly, one of the algorithms for privacy as providing no
protection against disclosure. (The combination of these two
insecure algorithms is sometimes referred to as "noAuth/noPriv".)
2.4. Access Control
An access control policy specifies the types of SNMPv2 requests and
associated MIB views which are authorized for a particular identity
(on whose behalf a request is generated) when using a particular
level of security to access a particular context.
2.5. Security Models
A security model defines the mechanisms used to achieve an
administratively-defined level of security for protocol interactions:
(1) by defining the security parameters associated with a
communication, including the authentication and privacy algorithms
and the security keys (if any) used.
(2) by defining how entities on whose behalf requests are generated are
identified.
(3) by defining how contexts are identified.
(4) by defining the mechanisms by which an access control policy is
derived whenever management information is to be accessed.
2.6. Proxy
It is an SNMPv2 agent which responds to requests for access to
management information. Each such request is contained within an
SNMPv2 message which provides the capability to perform a single
operation on a list of items of management information. Rather than
having to identify the context as well as the managed object type and
instance for each item of management information, each SNMPv2 message
is concerned with only a single context. Thus, an SNMPv2 agent must
be able to process requests for all items of management information
within the one or more contexts it supports.
McCloghrie Experimental [Page 5]
RFC 1909 An SNMPv2 Administrative Infrastructure February 1996
In responding to a request, an SNMPv2 agent might be acting as a
proxy for some other agent. The term "proxy" has historically been
used very loosely, with multiple different meanings. These different
meanings include (among others):
(1) the forwarding of SNMPv2 requests on to other SNMP agents without
regard for what managed object types are being accessed; for
example, in order to forward SNMPv2 request from one transport
domain to another, or to translate SNMPv2 requests into SNMPv1
requests;
(2) the translation of SNMPv2 requests into operations of some non-SNMP
management protocol;
(3) support for aggregated managed objects where the value of one
managed object instance depends upon the values of multiple other
(remote) items of management information.
Each of these scenarios can be advantageous; for example, support for
aggregation for management information can significantly reduce the
bandwidth requirements of large-scale management activities.
However, using a single term to cover multiple different scenarios
causes confusion.
To avoid such confusion, this SNMPv2 administrative framework uses
the term "proxy" with a much more tightly defined meaning, which
covers only the first of those listed above. Specifically, the
distinction between a "regular SNMPv2 agent" and a "proxy SNMPv2
agent" is simple:
- a proxy SNMPv2 agent is an SNMPv2 agent which forwards requests on
to other agents according to the context, and irrespective of the
specific managed object types being accessed;
- in contrast, an SNMPv2 agent which processes SNMPv2 requests
according to the (names of the) individual managed object types and
instances being accessed, is NOT a proxy SNMPv2 agent from the
perspective of this administrative model.
Thus, when an SNMPv2 agent acts as a proxy SNMPv2 agent for a
particular context, although information on how to forward the
request is specifically associated with that context, the proxy
SNMPv2 agent has no need of a detailed definition of the MIB view
(since the proxy SNMPv2 agent forwards the request irrespective of
the managed object types).
In contrast, a SNMPv2 agent operating without proxy must have the
detailed definition of the MIB view, and even if it needs to issue
McCloghrie Experimental [Page 6]
RFC 1909 An SNMPv2 Administrative Infrastructure February 1996
requests to other agents, that need is dependent on the individual
managed object instances being accessed (i.e., not only on the
context).
3. Elements of the Model
This section provides a more formal description of the model.
3.1. SNMPv2 Entity
An SNMPv2 entity is an actual process which performs management
operations by generating and/or responding to SNMPv2 protocol
messages in the manner specified in [4]. An SNMPv2 entity assumes
the identity of a particular administrative entity when processing an
SNMPv2 message.
An SNMPv2 entity is not required to process multiple protocol
messages concurrently, regardless of whether such messages require it
to assume the identity of the same or different administrative
entity. Thus, an implementation of an SNMPv2 entity which supports
more than one administrative entity need not be multi-threaded.
However, there may be situations where implementors may choose to use
multi-threading.
An SNMPv2 entity listens for incoming, unsolicited SNMPv2 messages on
each transport service address for which it is configured to do so.
It is a local matter whether an SNMPv2 entity also listens for SNMPv2
messages on any other transport service addresses. In the absence of
any other information on where to listen, an SNMPv2 entity must
listen on the transport service addresses corresponding to the
standard transport-layer "ports" [5] on its local network-layer
addresses.
3.2. SNMPv2 Agent
An SNMPv2 agent is the operational role assumed by an SNMPv2 entity
when it acts in an agent role. Specifically, an SNMPv2 agent
performs SNMPv2 management operations in response to received SNMPv2
protocol messages (except for inform notifications).
In order to be manageable, all network components need to be
instrumented. SNMPv2 access to the instrumented information is via
the managed objects supported by an SNMPv2 agent in one or more
contexts.
McCloghrie Experimental [Page 7]
RFC 1909 An SNMPv2 Administrative Infrastructure February 1996
3.3. SNMPv2 Manager
An SNMPv2 manager is the operational role assumed by an SNMPv2 entity
when it acts in a manager role on behalf of management applications.
Specifically, an SNMPv2 manager initiates SNMPv2 management
operations by the generation of appropriate SNMPv2 protocol messages,
or when it receives and processes trap and inform notifications.
It is interesting to consider the case of managing an SNMPv2 manager.
It is highly desirable that an SNMPv2 manager, just like any other
networking application, be instrumented for the purposes of being
managed. Such instrumentation of an SNMPv2 manager (just like for
any other networking application) is accessible via the managed
objects supported by an SNMPv2 agent. As such, an SNMPv2 manager is
no different from any other network application in that it has
instrumentation, but does not itself have managed objects.
That is, an SNMPv2 manager does not itself have managed objects.
Rather, it is an associated SNMPv2 agent supporting managed objects
which provides access to the SNMPv2 manager's instrumentation.
3.4. SNMPv2 Dual-Role Entity
An SNMPv2 entity which sometimes acts in an agent role and sometimes
acts in a manager role, is termed an SNMPv2 dual-role entity. An
SNMPv2 dual-role entity initiates requests by acting in a manager
role, and processes requests regarding management information
accessible to it (locally or via proxy) through acting in an agent
role. In the case of sending inform notifications, an SNMPv2 dual-
role entity acts in a manager role in initiating an inform
notification containing management information which is accessible to
it when acting in an agent role.
An SNMPv2 entity which can act only in an SNMPv2 manager role is not
SNMP-manageable, since there is no way to access its management
instrumentation. In order to be SNMP-manageable, an SNMPv2 entity
must be able to act in an SNMPv2 agent role in order to allow its
instrumentation to be accessed. Thus, it is highly desirable that
all SNMPv2 entities be either SNMPv2 agents or SNMPv2 dual-role
entities.
There are two categories of SNMPv2 dual-role entities: proxy SNMPv2
agents and (so-called) mid-level managers. Proxy SNMPv2 agents only
forward requests/responses; they do not originate requests. In
contrast, mid-level managers often originate requests. (Note that
the term proxy SNMPv2 agent does not include an SNMPv2 agent which
translates SNMPv2 requests into the requests of some other management
protocol; see section 2.6.)
McCloghrie Experimental [Page 8]
RFC 1909 An SNMPv2 Administrative Infrastructure February 1996
3.5. View Subtree and Families
A view subtree is the set of all MIB object instances which have a
common ASN.1 OBJECT IDENTIFIER prefix to their names. A view subtree
is identified by the OBJECT IDENTIFIER value which is the longest
OBJECT IDENTIFIER prefix common to all (potential) MIB object
instances in that subtree.
A family of view subtrees is a pairing of an OBJECT IDENTIFIER value
(called the family name) together with a bitstring value (called the
family mask). The family mask indicates which sub-identifiers of the
associated family name are significant to the family's definition.
For each possible managed object instance, that instance belongs to a
particular view subtree family if both of the following conditions
are true:
o the OBJECT IDENTIFIER name of the managed object instance contains
at least as many sub-identifiers as does the family name, and
o each sub-identifier in the OBJECT IDENTIFIER name of the managed
object instance matches the corresponding sub-identifier of the
family name whenever the corresponding bit of the associated family
mask is non-zero.
When the configured value of the family mask is all ones, the view
subtree family is identical to the single view subtree identified by
the family name.
When the configured value of the family mask is shorter than required
to perform the above test, its value is implicitly extended with
ones. Consequently, a view subtree family having a family mask of
zero length always corresponds to a single view subtree.
3.6. MIB View
A MIB view is a subset of the set of all instances of all object
types defined according to the SMI [1] within an SNMPv2 context,
subject to the following constraints:
o It is possible to specify a MIB view which contains the full set of
all object instances within an SNMPv2 context.
o Each object instance within a MIB view is uniquely named by an
ASN.1 OBJECT IDENTIFIER value.
As such, identically named instances of a particular object type must
be contained within different SNMPv2 contexts. That is, a particular
McCloghrie Experimental [Page 9]
RFC 1909 An SNMPv2 Administrative Infrastructure February 1996
object instance name resolves within a particular SNMPv2 context to
at most one object instance.
A MIB view is defined as a collection of view subtree families, where
each view subtree family has a type. The type determines whether the
view subtree family is included in, or excluded from, the MIB view.
A managed object instance is contained/not contained within the MIB
view according to the view subtree families to which the instance
belongs:
o If a managed object instance belongs to none of the relevant
subtree families, then that instance is not in the MIB view.
o If a managed object instance belongs to exactly one of the relevant
subtree families, then that instance is included in, or excluded
from, the relevant MIB view according to the type of that subtree
family.
o If a managed object instance belongs to more than one of the
relevant subtree families, then that instance is included in, or
excluded from, the relevant MIB view according to the type of a
particular one of the subtree families to which it belongs. The
particular subtree family is the one for which, first, the
associated family name comprises the greatest number of sub-
identifiers, and, second, the associated family name is
lexicographically greatest.
3.7. SNMPv2 Context
An SNMPv2 context is a collection of management information
accessible by an SNMPv2 entity. The collection of management
information identified by a context is either local or proxy.
For a local SNMPv2 context which is realized by an SNMPv2 entity,
that SNMPv2 entity uses locally-defined mechanisms to access the
management information identified by the SNMPv2 context.
For a proxy SNMPv2 context, the SNMPv2 entity acts as a proxy SNMPv2
agent to access the management information identified by the SNMPv2
context.
The term remote SNMPv2 context is used at an SNMPv2 manager to
indicate a SNMPv2 context (either local or proxy) which is not
realized by the local SNMPv2 entity (i.e., the local SNMPv2 entity
uses neither locally-defined mechanisms, nor acts as a proxy SNMPv2
agent, to access the management information identified by the SNMPv2
context).
McCloghrie Experimental [Page 10]
RFC 1909 An SNMPv2 Administrative Infrastructure February 1996
3.7.1. Local SNMPv2 Context
A local context refers to a collection of MIB objects which
(logically) belong to a single entity within a managed device. When
an SNMPv2 entity accesses that management information, it does so
using locally-defined mechanisms.
Because a device may contain several such local entities, each local
context has associated with it a "local entity" name. Further,
because management information changes over time, each local context
also has associated with it an associated temporal domain, termed its
"local time". This allows, for example, one context to refer to the
current values of a device's parameters, and a different context to
refer to the values that the same parameters for the same device will
have after the device's next restart.
3.7.2. Proxy SNMPv2 Context
A proxy relationship exists when a proxy SNMPv2 agent processes a
received SNMPv2 message (a request or a response) by forwarding it to
another entity, solely according to the SNMPv2 context of the
received message. Such a context is called a proxy SNMPv2 context.
When an SNMPv2 entity processes management requests/responses for a
proxy context, it is operating as a proxy SNMPv2 agent.
The transparency principle that defines the behavior of an SNMPv2
entity in general, applies in particular to a proxy SNMPv2 context:
The manner in which a receiving SNMPv2 entity processes SNMPv2
protocol messages sent by another SNMPv2 entity is entirely
transparent to the sending SNMPv2 entity.
Implicit in the transparency principle is the requirement that the
semantics of SNMPv2 management operations are preserved between any
two SNMPv2 peers. In particular, the "as if simultaneous" semantics
of a
Set operation are extremely difficult to guarantee if its scope
extends to management information resident at multiple network
locations. Note however, that agents which support the forwarding of
Set operations concerning information at multiple locations are not
considered to be proxy SNMPv2 agents (see section 2.6 above).
Also implicit in the transparency principle is the requirement that,
throughout its interaction with a proxy SNMPv2 agent, an SNMPv2
manager is supplied with no information about the nature or progress
of the proxy mechanisms used to perform its requests. That is, it
should seem to the SNMPv2 manager (except for any distinction in an
McCloghrie Experimental [Page 11]
RFC 1909 An SNMPv2 Administrative Infrastructure February 1996
underlying transport address) as if it were interacting via SNMPv2
directly with the proxied device. Thus, a timeout in the
communication between a proxy SNMPv2 agent and its proxied device
should be represented as a timeout in the communication between the
SNMPv2 manager and the proxy SNMPv2 agent. Similarly, an error
response from a proxied device should - as much as possible - be
represented by the corresponding error response in the interaction
between the proxy SNMPv2 agent and SNMPv2 manager.
3.8. SNMPv2 PDUs and Operations
An SNMPv2 PDU is defined in [4]. Each SNMPv2 PDU specifies a
particular operation, one of:
GetBulkRequest
GetNextRequest
GetRequest
Inform
Report
Response
SNMPv2-Trap
SetRequest
3.8.1. The Report-PDU
[4] requires that an administrative framework which makes use of the
Report-PDU must define its usage and semantics. With this
administrative framework, the Report-PDU differs from the other PDU
types described in [4] in that it is not a protocol operation between
SNMPv2 managers and agents, but rather is an aspect of error-
reporting between SNMPv2 entities. Specifically, it is an interaction
between two protocol engines.
A communication between SNMPv2 entities is in the form of an SNMPv2
message. Such a message is formatted as a "wrapper" encapsulating a
PDU according to the "Elements of Procedure" for the security model
used for transmission of the message.
While processing a received communication, an SNMPv2 entity may
determine that the received message is unacceptable due to a problem
associated with the contents of the message "wrapper". In this case,
an appropriate counter is incremented and the received message is
discarded without further processing (and without transmission of a
Response-PDU).
However, if an SNMPv2 entity acting in the agent role makes such a
determination, then after incrementing the appropriate counter, it
may be required to generate a Report-PDU and to send it to the
McCloghrie Experimental [Page 12]
RFC 1909 An SNMPv2 Administrative Infrastructure February 1996
transport address which originated the received message.
If the agent is able to determine the value of the request-id field
of the received PDU [4], then it must use that value for the
request-id field of the Report-PDU. Otherwise, the value 2147483647
is used.
The error-status and error-index fields of the Report-PDU are always
set to zero. The variable-bindings field contains a single variable:
the identity of the counter which was incremented and its new value.
There is at least one case in which a Report-PDU must not be sent by
an SNMPv2 entity acting in the agent role: if the received message
was tagged as a Report-PDU. Particular security models may identify
other such cases.
3.9. SNMPv2 Access Control Policy
An SNMPv2 access policy specifies the types of SNMPv2 operations
authorized for a particular identity using a particular level of
security, and if the operation is to be performed on a local SNMPv2
context, two accessible MIB views. The two MIB views are a read-view
and a write-view. A read-view is a set of object instances
authorized for the identity when reading objects. Reading objects
occurs when processing a retrieval (get, get-next, get-bulk)
operation and when sending a notification. A write-view is the set
of object instances authorized for the identity when writing objects.
Writing objects occurs when processing a set operation. An
identity's access rights may be different at different agents.
A security model defines how an SNMPv2 access policy is derived;
however, the application of an SNMPv2 access control policy is
performed only:
o on receipt of GetRequest, GetNextRequest, GetBulkRequest, and
SetRequest operations; and
o prior to transmission of SNMPv2-Trap and Inform operations.
Note that application of an SNMPv2 access control policy is never
performed for Response or Report operations.
4. Security Considerations
Security issues are not directly discussed in this memo.
McCloghrie Experimental [Page 13]
RFC 1909 An SNMPv2 Administrative Infrastructure February 1996
5. Editor's Address
Keith McCloghrie
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
US
Phone: +1 408 526 5260
EMail: kzm@cisco.com
6. Acknowledgements
This document is the result of significant work by three major
contributors:
Keith McCloghrie (Cisco Systems, kzm@cisco.com)
Marshall T. Rose (Dover Beach Consulting, mrose@dbc.mtview.ca.us)
Glenn W. Waters (Bell-Northern Research Ltd., gwaters@bnr.ca)
The authors wish to acknowledge James M. Galvin of Trusted
Information Systems who contributed significantly to earlier work on
which this memo is based, and the general contributions of members of
the SNMPv2 Working Group, and, in particular, Aleksey Y. Romanov and
Steven L. Waldbusser.
A special thanks is extended for the contributions of:
Uri Blumenthal (IBM)
Shawn Routhier (Epilogue)
Barry Sheehan (IBM)
Bert Wijnen (IBM)
7. References
[1] The SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and
S. Waldbusser, "Structure of Management Information for Version 2
of the Simple Network Management Protocol (SNMPv2)", RFC 1902,
January 1996.
[2] The SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and
S. Waldbusser, "Textual Conventions for Version 2 of the Simple
Network Management Protocol (SNMPv2)", RFC 1903, January 1996.
[3] The SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and
S., Waldbusser, "Conformance Statements for Version 2 of the Simple
Network Management Protocol (SNMPv2)", RFC 1904, January 1996.
McCloghrie Experimental [Page 14]
RFC 1909 An SNMPv2 Administrative Infrastructure February 1996
[4] The SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and
S. Waldbusser, "Protocol Operations for Version 2 of the Simple
Network Management Protocol (SNMPv2)", RFC 1905, January 1996.
[5] The SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and
Waldbusser, S., "Transport Mappings for Version 2 of the Simple
Network Management Protocol (SNMPv2)", RFC 1906, January 1996.
[6] The SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and
Waldbusser, S., "Management Information Base for Version 2 of the
Simple Network Management Protocol (SNMPv2)", RFC 1907,
January 1996.
[7] Rose, M., and K. McCloghrie, "Structure and Identification of
Management Information for TCP/IP-based internets", STD 16, RFC
1155, May 1990.
[8] Rose, M., and K. McCloghrie, "Concise MIB Definitions", STD 16,
RFC 1212, March 1991.
[9] Case, J., Fedor, M., Schoffstall, M., and J. Davin, "Simple
Network Management Protocol", STD 15, RFC 1157, SNMP Research,
Performance Systems International, MIT Laboratory for Computer
Science, May 1990.
[10] The SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and
Waldbusser, S., "Coexistence between Version 1 and Version 2 of the
Internet-standard Network Management Framework", RFC 1908, January
1996.
[11] McCloghrie, K., and F. Kastenholz, "Evolution of the Interfaces
Group of MIB-II", RFC 1573, Cisco Systems, FTP Software, January
1994.
[12] Information processing systems - Open Systems Interconnection -
Specification of Abstract Syntax Notation One (ASN.1),
International Organization for Standardization. International
Standard 8824, (December, 1987).
McCloghrie Experimental [Page 15]
RFC 1909 An SNMPv2 Administrative Infrastructure February 1996
APPENDIX A - Disambiguating the SNMPv2 Protocol Definition
The descriptions in [4] of the role in which an SNMPv2 entity acts when
sending an Inform-Request PDU are ambiguous. The following updates
serve to remove those ambiguities.
(1) Add the following sentence to section 2.1:
Further, when an SNMPv2 entity sends an inform notification,
it acts in a manager role in respect to initiating the
operation, but the management information contained in the
inform notification is associated with that entity acting in
an agent role. By convention, the inform is sent from the
same transport address as the associated agent role is
listening on.
(2) Modify the last sentence of the second paragraph in section 2.3:
This type is used by one SNMPv2 entity, acting in a manager
role, to notify another SNMPv2 entity, also acting in a
manager role, of management information associated with the
sending SNMPv2 entity acting in an agent role.
(3) Modify the second paragraph of section 4.2 (concerning the
generation of Inform-Request PDUs):
It is mandatory that all SNMPv2 entities acting in a manager
role be able to generate the following PDU types: GetRequest-
PDU, GetNextRequest-PDU, GetBulkRequest-PDU, SetRequest-PDU,
and Response-PDU; further, all such implementations must be
able to receive the following PDU types: Response-PDU,
SNMPv2-Trap-PDU, InformRequest-PDU. It is mandatory that all
dual-role SNMPv2 entities must be able to generate an Inform-
Request PDU.
(4) Modify the first paragraph of section 4.2.7:
An InformRequest-PDU is generated and transmitted at the
request of an application in a SNMPv2 entity acting in a
manager role, that wishes to notify another application (via
an SNMPv2 entity also acting in a manager role) of information
in a MIB view which is accessible to the sending SNMPv2 entity
when acting in an agent role.
McCloghrie Experimental [Page 16]
RFC 1909 An SNMPv2 Administrative Infrastructure February 1996
APPENDIX B - Who Sends Inform-Requests?
B.1. Management Philosophy
Ever since its beginnings as SGMP, through its definition as SNMPv1,
and continuing with the definition of SNMPv2, SNMP has embodied more
than just a management protocol and the definitions of MIB objects.
Specifically, SNMP has also had a fundamental philosophy of
management, consisting of a number of design strategies. These
strategies have always included the following:
(1) The impact of incorporating an SNMP agent into a system should be
minimal, so that both: a) it is feasible to do so even in the
smallest/cheapest of systems, and b) the operational role and
performance of a system is not compromised by the inclusion of an
SNMP agent. This promotes widespread development, which allows
ubiquitous deployment of manageable systems.
(2) Every system (potentially) incorporates an SNMP agent. In
contrast, the number of SNMP managers is limited. Thus, there is a
significantly larger number of SNMP agents than SNMP managers.
Therefore, overall system development/complexity/cost is optimized
if the SNMP agent is allowed to be simple and any required
complexity is performed by an SNMP manager.
(3) The number of unsolicited messages generated by SNMP agents is
minimized. This enables the amount of network management traffic
to be controlled by the small number of SNMP managers which are
(more) directly controlled by network operators. In fact, this
control is considered of greater importance than any additional
protocol overhead which might be incurred. Monitoring of network
state at any significant level of detail is accomplished primarily
by SNMP managers polling for the appropriate information, with the
use of unsolicited messages confined to those situations where it
is necessary to properly guide an SNMP manager regarding the timing
and focus of its polling. This strategy is sometimes referred to
as "trap-directed polling".
B.2. The Danger of Trap Storms
The need for such control over the amount of network management
traffic is due to the potential that the SNMP manager receiving an
unsolicited message does not want, no longer wants, or already knows
of the information contained in the message. This potential is
significantly reduced by having the majority of messages be specific
requests for information by SNMP managers and responses (to those
requests) from SNMP agents.
McCloghrie Experimental [Page 17]
RFC 1909 An SNMPv2 Administrative Infrastructure February 1996
The danger of not having the amount of network management be
controlled in this manner is the potential for a "storm" of useless
traps. As a simple example of "useless", consider that after a
building power outage, every device in the network sends a coldStart
trap, even though every SNMP manager and every network operator
already knows what happened. For a simple example of "storm",
consider the result if each transmitted trap caused the sending of
another. The greater the number of problems in the state of the
network, the greater the risk of such a storm occurring, especially
in the unstructured, heterogeneous environment typical of today's
internets.
While SNMP philosophy considers the above to be more important than
any lack of reliability in unsolicited messages, some
users/developers have been wary of using traps because of the use
(typically) of an unreliable transport protocol and because traps are
not acknowledged. However, following this logic would imply that
having acknowledged-traps would make them reliable; of course, this
is false since no amount of re- transmission will succeed if the
receiver and/or the connectivity to the receiver is down. A SNMP
manager cannot just sit and wait and assume the network is fine just
because it is not receiving any unsolicited messages.
B.3. Inform-Requests
One of the new features of SNMPv2 is the Inform-request PDU. The
Inform-Request contains management information specified in terms of
MIB objects for a context supported by the sender. Since by
definition, an SNMPv2 manager does not itself have managed objects
(see sections 3.3), the managed objects contained in the Inform-
request belong to a context of an SNMPv2 agent, just like the managed
objects contained in an SNMPv2-Trap.
However, it is not the purpose of an Inform-request to change the
above described philosophy, i.e., it would be wrong to consider it as
an "acknowledged trap". To do so, would make the likelihood and
effect of trap storms worse. Recall the building power outage
example: with regular traps, the SNMP manager's buffer just
overflows when it receives messages faster than it can cope with; in
contrast, if every device in the network were to send a coldStart
Inform-request, then after a power outage, all will re-transmit their
Inform-request several times unless the receiving SNMP managers send
responses. In the best case when no messages are lost or re-
transmitted, there are twice as many useless messages; in the worst
case, the SNMP manager is unable to respond at all and every message
is re-transmitted its maximum number of times.
McCloghrie Experimental [Page 18]
RFC 1909 An SNMPv2 Administrative Infrastructure February 1996
The above serves to explain the rationale behind the definition (see
Appendix A's update to section 4.2.7 of [4]) that:
An InformRequest-PDU is generated and transmitted at the request of
an application in a SNMPv2 entity acting in a manager role, that
wishes to notify another application (via an SNMPv2 entity also
acting in a manager role) of information in a MIB view which is
accessible to the sending SNMPv2 entity when acting in an agent
role.
This definition says that SNMPv2 agents do not send Inform-Requests,
which has three implications (ordered in terms of importance):
(1) the number of devices which send Inform-requests is required to be
a small subset of all devices in the network;
(2) while some devices traditionally considered to be SNMP agents are
perfectly capable of sending Inform-requests, the overall system
development/complexity/cost is not increased as it would be by
having to configure/re-configure every SNMPv2 agent as to which
Inform-requests to send where and how often; and
(3) the cost of implementing an SNMPv2 agent in the smallest/cheapest
system is not increased.
McCloghrie Experimental [Page 19]
Html markup produced by rfcmarkup 1.129b, available from
https://tools.ietf.org/tools/rfcmarkup/
